Operation Mode - A&D UA-767JP Instruction Manual

1. Normal Measurement
Press the
START
stored in memory. This device can store the last 60 measurements for
each of the four users in memory.
2. Recalling the Data
Press the
memory. The average of all measurements is
displayed, as indicated in the figure at the right.
Then, each time the
memory data is displayed as follows.
Most recent data (No.n, in the example, No.35)
Last data (No.1)
For details on recalling the data, refer to
"Recalling the Memory Data".
3. Changing User for Memory Display
Press the
SET
The user is changed, and the average of
measurement values for that user is displayed.

Operation Mode

button. Blood pressure is measured and the data is
or button to recall the data in
button is pressed, the
button while a memory is displayed.
English 8