Emergency Override - Omega Freedom 400 Owner's Manual

How to Disarm the Security System Without the Transmitter:
If the system is armed, and in the event that the transmitter is lost, damaged, or
its batteries have become exhausted, the Valet /Override Switch & your vehicle's
ignition key may be used to disarm the system by performing an Emergency
Override.
IMPORTANT: in addition to the inclusion of the Valet/Override and Status
Indicator Light, the Freedom-400's "ignition input" wire must also be connected.
If the Freedom-400 was not installed with the Valet/Override Switch, or the ignition
input being connected, the only way to bypass, or turn off the system is to locate
and unplug the control module and siren assembly must be unplugged from its
wiring harness!

Emergency Override:

Step 1: With the system in the armed condition, enter the vehicle via the driver's
door
(be aware that the alarm will likely activate when the door is opened)
Step 2: Using your key, turn the vehicle's ignition to the "On" position.
EMERGENCY OVERRIDE-
Page 15
.