Installation - Omega Freedom 400 Owner's Manual

Please Note- the center section of this booklet
consists of complete Installation Instructions for
your Freedom-400 security and convenience
system. If desired, these pages may be removed,
leaving only the Owner's Guide booklet.

Installation

Mounting the Control Unit and Siren Assembly: Find a location in the engine
compartment away from the extreme heat of the engine and manifolds. A suit-
able location will offer a firm mounting surface, will also allow sound dispersion
out of the engine compartment, and not be accessible to a thief. The control unit
and siren assembly must be pointed downward to avoid moisture collecting in the
unit and to enhance sound dispersal. The unit's wires should be securely con-
nected to the appropriate vehicle wires with the proper terminals, connectors, or
by soldering and tape or heat shrink tubing for insulation. Wires routed through
panels such as the firewall should always be protected by an existing or added
grommet. A vehicle security system is also more effective if its wiring is wrapped
or enclosed in a protective sleeve which matches that already found in the ve-
hicle protecting the factory wiring.
Installation Insert Page 1