Table of Contents
Advertisement
Quick Links
L I M I T E D
L I F E T I M E
Products manufactured and sold by OMEGA RESEARCH & DEVELOPMENT,
INC. (the "Company"), are warranted to be free from defects in materials and
workmanship under normal use. If a product sold by the Company proves to be
defective, the Company will repair or replace it free of charge within the first year
and thereafter all parts to be repaired will be free with only a nominal charge for
Omega's labor and return shipping, to the original owner during the lifetime of the
car in which it was originally installed.
All products for warranty repair must be sent postage prepaid to Omega
Research & Development, Inc., P.O. Box 508, Douglasville, Georgia 30133, or
send via UPS to: 981 N. Burnt Hickory Rd., Douglasville, Georgia 30134, with
bill of sale or other dated proof of purchase. This warranty is nontransferable and
does not apply to any product damaged by accident, physical or electrical misuse
BACK COVER
or abuse, improper installation, alteration, any use contrary to its intended
function, unauthorized service, fire, flood, lightning, or other acts of God.
PRINTER'S NOTE:
This warranty limits the Company's liability to the repair or replacement of
the product. The Company shall not be responsible for removal and/or reinstallation
production back cover
charges, damage to or theft of the vehicle or its contents, or any incidental or
consequential damages caused by any failure or alleged failure of the product to
is color; this is a
function properly. UNDER NO CIRCUMSTANCES SHOULD THIS
WARRANTY, OR THE PRODUCT COVERED BY IT, BE CONSTRUED
place marker cover.
AS A GUARANTEE OR INSURANCE POLICY AGAINST LOSS. The
Company neither assumes nor authorizes any person or organization to make any
warranties or assume any liability in connection with the sale, installation, or use
of this product.
This device complies with F.C.C Rules part 15. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference
and, (2) This device must accept any interference that may be received, including
interference that may cause undesired operation.
The manufacturer is not responsible for any radio TV interference caused by
unauthorized modifications to this equipment. Such modifications could void the
user's authority to operate the equipment.
Omega Research and Development, Inc.
Douglasville, Georgia
www.caralarm.com
W A R R A N T Y
P. O. Box 508
30133
07/09 MO-CG-810i6
Crime Guard
810i6
OPERATION MANUAL
FRONT COVER
PRINTER'S NOTE:
production front cover
is color; this is a
place marker cover.
COPYRIGHT 2009: OMEGA RESEARCH & DEVELOPMENT, INC.
Advertisement
Table of Contents
Related Manuals for Omega Crime Guard 810i6
Summary of Contents for Omega Crime Guard 810i6
- Page 1 Crime Guard and thereafter all parts to be repaired will be free with only a nominal charge for Omega's labor and return shipping, to the original owner during the lifetime of the car in which it was originally installed. All products for warranty repair must be sent postage prepaid to Omega Research &...
-
Page 2: Complete Programmable Features Matrix
Datatach (3) 4th Option: Crank Only (Lock & Unlock) Ext. Starter Cranking Time .75 (minimum) (L) 1.00 (U) 1.5 (2) 2.25 (maximum) (3) Omega Research and Development, Inc. Remote Start Relay Ignition (L) Accessory (U) Starter (2) www.caralarm.com Arm/Disarm or Add. Chan. -
Page 3: Table Of Contents
This Booklet Contains Feature #7 Extended Starter Cranking Time press “arm/lock” button to program Default Setting Min (.75 Second) ( Options: Introduction to the System ............. 4-6 press “disarm/unlock” button to program Medium Lo (1.00 Second) ( Status Light, Valet Switch, Transmitter press “II”... -
Page 4: Introduction To The System
Congratulations for your choice of the most versatile, fully-featured vehicle This feature should only be programmed by the installer, and the operation of security and convenience system available today, by Omega Research and Devel- this feature depends on the correct connection of the safety wire to the vehicle’s opment. - Page 5 1-Way Transmitter Feature #3 Horn Relay Functions Factory Default Setting Horn Output press “arm/lock” button to program “arm/lock” “disarm/unlock” Options: button button press “disarm/unlock” button to program Door Unlock press “II” button to program Ignition Output Accessory Output press “III” button to program This is the second of two built-in relays which can be programmed to perform several different functions.
- Page 6 .8 second to as long as a 28 second duration output. The unlock output is 3 seconds in this setting. The CG-810i6 is capable of having the optional Omega “Echo” Note: When this feature is turned on, during the 28 second period after arm-...
-
Page 7: Using The System
The Installer Programmable Features Using the System Your system is designed to deter theft of both your vehicle and its contents. Installer Programmable Features should only be used by the original “Arming” your system turns on the protection, disabling the vehicle’s starter or other qualified installer, AND individual Installer Features should and locking the doors. -
Page 8: Automatic "Last Door Arming" Of The System
The system’s separate “arm/lock” and “disarm/unlock” button design allows press “arm/lock” button to program Option: repetitive operation- if already armed, pressing the “arm/lock” button will simply When this feature is turned on, if one of the vehicle's doors is open at the time that rearm the system, and vice versa when pressing the “disarm/unlock”... -
Page 9: While The System Is Armed, And Should It Trigger
applications is being used to sound the vehicle’s existing horn. This feature changes must be closed to initiate the Last Door Arming sequence. only the primary audible output, so that it can be utilized to sound the existing To temporarily prevent the system from automatically Last Door Arming, you have horn by itself. -
Page 10: Disarming The System Using Transmitters
Feature #12 Parking Light Illumination Upon Disarm • Pressing “disarm/unlock” will disarm the system, leaving the doors locked, Factory Default Setting press “arm/lock” button to program stopping both system’s alarm condition (leaving it disarmed) Pressing the press “disarm/unlock” button to program Option: button a second time unlocks the doors. -
Page 11: Safety Disarm Feature; Activation Alert; Automatic Rearming Disarming By Emergency Override
If the system was activated and reset itself: The disarming confirmation will press “disarm/unlock” button to program no longer be 2 siren chirps, and the parking lights flashing twice before staying on Chirps Excepting Valet Mode press “II” button to program press “III”... -
Page 12: Remote Panic Feature
Step 2 Using the ignition key, turn the vehicle’s ignition switch on. Feature #6 Doors Lock With Ignition On press “arm/lock” button to program Factory Default Setting Step 3 Within 5 seconds press and release the Valet Switch one time. The system Option: press “disarm/unlock”... -
Page 13: Remote Engine Starting
Feature #3 Automatic Rearming Remote Engine Starting Factory Default Setting press “arm/lock” button to program The remote engine starting feature should not be used when Options: the vehicle is parked in an enclosed structure or garage! On without doors locking press “disarm/unlock”... - Page 14 To drive the vehicle away after remote starting, disarm the system (if needed) open Feature #1 SecureCode the door to enter the vehicle, insert the key into the ignition switch and turn the Factory Default Setting 1 Press Options: switch to “on” or “run” position (not “start”!). Then press the brake pedal or remove 1 to 9 presses, in each of two stages the gear selector from “park”;...
- Page 15 Step 2 Press and release the transmitter “III” button twice (same as activating Each of the Programmable Features is described in detail in the remote start). The Status Light will begin flashing green, as the system is following pages. The User Programmable Features are described as now keeping the engine running.
-
Page 16: Other Transmitter Operations
Low Voltage and Low Temperature Starting Feature: This feature will To Access a Feature: Step 4 automatically start the engine should the vehicle battery voltage drop to 11 volts or Within 10 seconds, Press & Release the Valet Switch the same num- temperature drop to 15 or 32 degrees fahrenheit. -
Page 17: How To Program Features
interior lights for 30 seconds, unlocking the doors, and disarming the system if it Once the Unauthorized Transmitter Alert feature is turned on, the warning will sound was armed. The 2nd channel output will not operate when the ignition switch is "on" for 48 hours after any transmitter programming, including the programming session unless the vehicle's door is open. -
Page 18: How To Program Transmitters
placing into Alarm Valet Mode. Once the system is in Alarm Valet Mode, it cannot How to program Transmitters become armed from the transmitter, Last Door Arming, or Automatic Rearming. The system is capable of being operated by as many as four transmitters; these can Alarm Valet Mode and Emergency Override are two similar, but different be any combination of 1-way transmitters or optional 2-way controllers. -
Page 19: Securecode
alarm condition, it will not respond to the transmitter, nor will the system reset indication is present whenever the system is in Full Valet Mode. automatically after 60 seconds, and it can only be disengaged by: • There will be the single chirp reminder every time the ignition turns off. This is for the Alarm Valet Mode part of the Full Valet Mode condition. -
Page 20: The Status Light
The Status Light 13) Flashing Slow Green = The engine is running via the remote starting system. 14) Flashing Fast Green = A remote start command has been received, and the The Status Light visually confirms the status of the system and provides a high system is in the process of starting the engine.