Omega Freedom 400 Owner's Manual page 2

Introduction
Congratulations on the purchase of your Freedom-400 vehicle security system.
It is most important to note that the Freedom-400 has a unique and flexible
design, which allows the system to be installed in several configurations, or lev-
els of sophistication, and thus affects the total operations. The exact operations
of your system reflect this, and therefore it is most important that this operations
guide be carefully read and referred to. Regardless of how configured, you'll find
your system both easy to operate and reassuring in its effective theft deterrence
capabilities.
Some principle components to become familiar with:
The Transmitter: Regardless of how the system is configured, the remote trans-
mitter is used to operate the system. Two transmitters can operate the system,
and two are supplied with the system already programmed to operate it.
Every transmitter has its own unique, invisible code, and thus cannot be
duplicated. The transmitter has three buttons: an "Arm" button, a "Disarm" button
and a "Small Button" which can be used, if desired, to arm and disarm your system
silently, and to bypass the built-in shock sensor. The "Arm" and "Disarm" buttons
also operate the Remote Panic feature. The "Small Button" is also used in
transmitter and features' programming operations.
Page 3