Table of Contents
Advertisement
SELECTInG BUTTOn BEEP, mELODy, & VIBRATE mODES
The controller has 3 different type of alert modes. BUTTON BEEP configures the
controller to beep as a confirmation when you press any icon on the screen. The
MELODY and VIBRATE settings configure how you are alerted any time the controller
receives a confirmation or alert from the vehicle's system. MELODY turns on/off all
audible alerts including voice alerts� VIBRATE mode turns on/off vibration alert� To
change these options:
1) Access SCREEN 3 (press HOME, tap the screen, press the DOWN ARROW twice)
2) Press the alert icon (pictured below)�
3) Change the alert settings as desired according to the diagram below�
4) Press the folder icon to save the setting
2
Alert Icon
CLOCK & TImE OPTIOnS OVERVIEW
The controller's clock has 3 programmable options� You can set the time & date,
select 12 or 24 hour format, and program the built-in alarm clock� To program these
options, you must first access SCREEN 4 by pressing the home button, tapping the
screen, and pressing the DOWN ARROW 3 times�
Set Time/Date
Set Alarm Clock
SETTInG THE TImE & DATE
1) Access SCREEN 4 and press the "SET TIME/DATE" icon�
2) Use the number pad screen to set the date� Format: MMDDYY
~ BLUE arrow = Backspace
3) Once the date is correct, press the gREEN arrow to save�
Programming Controller Options
3
Button Beep OFF
Vibrate On/OFF
SCREEn 4
Alert Settings
Clock Format 12/24
Hour
Demo mode
See pg. 17
Vibrate On Indicator
melody On Indicator
Button Beep On
melody On/OFF
Save Settings
15
Advertisement
Table of Contents
