Connecting To A Computer; Interfaces; Interconnection - Oki ML1120 User Manual

C
ONNECTING TO A COMPUTER
In this section you will interconnect your printer and computer,
install the printer driver in your computer and print a test page.
I
NTERFACES
Your printer is equipped with three data interfaces:
Do not use more than one of the following data
interface methods to connect to your PC.
> Parallel: for direct connection to a PC. This port requires a
bi-directional (IEEE 1284 compliant) parallel cable.
> Serial: for direct connection to a PC. This port requires a
bi-directional RS232C serial interface cable.
> USB: for connection to a PC running Windows 98 or
above. This port requires a shielded cable less than 5m
long conforming to USB version 2.0.
NOTE
Interface cables are not supplied with your printer.
I
NTERCONNECTION
1. Ensure that both printer and computer are turned OFF.
2. Connect the required interface cable, serial (1), USB (2),
or parallel (3), to the printer and then to the computer.
ML1120/ML1190 User's Guide – Connecting to a computer > 15
CAUTION!