pushing gently forward until the Input Tray clips into
place.
10.
Replace the Access Cover.
11.
Press the LOAD/EJECT button. The continuous forms will
be taken into the printer and positioned at the first line
print position.
F
EEDING CONTINUOUS FORMS
NOTE
If there is a cut sheet in the printer, eject it as described in
"Ejecting cut sheet paper" on page
Moving tractor assembly
1.
Ensure that the printer is switched OFF.
2.
Disconnect the power cord.
ML1120/ML1190 User's Guide – Paper handling > 25
(
)
BOTTOM FEED
20.