Ml1190 - Oki ML1120 User Manual

ML1190

ITEM
Product Name
Model No.
Print method
Print head
Print direction
Print speed
High Speed Draft (HSD)
Letter Quality (LQ)
Utility
Line Feed (LF) time
Form Feed (FF) speed
Paper feed control
Duplication capability
Feeding direction
Feeding mode
Continuous forms tape tail
detection method
ML1120/ML1190 User's Guide – Specifications > 77
SPECIFICATION
ML1190
D22410B
Impact dot matrix
24 pins, 0.2 mm (0.0079 in) diameter
Bi-directional, short-line-seeking printing
400cps @ 10 cpi
100 cps @ 10 cpi
300 cps @ 10 cpi
Approximately 47 ms per line for LF of
4.23 mm (1/6 in)
Approximately 114.3 mm/s (4.5 in/s)
Paper feed: yes
Vertical tab: yes
Direct line feed: yes
Continuous forms: the original page +4 more
pages (total maximum paper thickness less
than 0.325 mm)
Cut sheet: the original page +4 more pages
(total maximum paper thickness less than
0.325 mm)
Feed forward
Feed backward
Feed upward
Friction feed mode (top)
Pin tractor feed mode (rear)
Pin tractor feed mode (bottom)
Detected when remaining paper is
approximately 46 mm long. It can, however,
print till about 6 mm from the paper bottom
(measured at the centre of the characters).
(The print accuracy of the last page cannot
be guaranteed.)