Cisco ASR 903 router Features
T1/E1 Interface Module
The T1/E1 interface module provides connectivity for up to 16 T1/E1 ports through a 100-pin Amplimite
connector. The T1/E1 interface module requires the use of a patch panel to provide RJ48 (T1) or BNC
(E1) connectors.
Figure 1-10
For more information about installing a T1/E1 interface module, see the
section on page
OC-3 Interface Module
The OC-3 interface module can operate as up to four STM-1 interfaces.
The optical interface module is designed for OC-3 and OC-12 traffic, but OC-12 functionality is not
Note
currently supported.
Cisco ASR 903 Router Hardware Installation Guide
1-16
B E TA D R A F T - C I S C O C O N F I D E N T I A L
Figure 1-10
shows the interface module.
16 x T1/E1 Interface Module
3-17.
Chapter 1
Cisco ASR 903 router Overview
"Interface Module Installation"
OL-25178-03