Cisco ASR 903 Installation Manual page 65

Chapter 3 Installing the Cisco ASR 903 Router
Using a crimping tool (as specified by the ground lug manufacturer), crimp the ground lug to the ground wire
Step 3
as shown in
Figure 3-12
Use a Phillips head screwdriver to attach the 2-hole ground lug and wire assembly to the router with the
Step 4
2 pan-head Phillips head screws. For a 19-inch EIA rack, attach the 2-hole ground lug to the rear of the
router.
Connect the other end of the ground wire to a suitable grounding point at your site.
Step 5
OL-25178-03
Figure 3-12.
Crimping a Ground Lug onto the Ground Wire
Installing the Chassis Ground Connection
Cisco ASR 903 Router Hardware Installation Guide
3-9