Cisco ASR 903 Installation Manual page 56

Receiving the Cisco ASR 903 Router
Table 2-2 Cisco ASR 903 Router Shipping Container Contents (continued)
Component
Accessories kit
ESD, wrist strap (disposable)
Documentation
Optional equipment
Most Cisco documentation is available online. Documentation that is shipped with your
Note
Cisco ASR 903 Router includes the Regulatory Compliance and Safety Information for the
Cisco ASR 903 Router document, and the Cisco ASR 903 Router Documentation Roadmap that contains
information about the various documents that are available online and the links to them.
Cisco ASR 903 Router Hardware Installation Guide
2-22
Description
Chassis rack-mount brackets (19-inch EIA)
Three sets of screws:
Front and rear rack-mount bracket screws (2 sets)
•
Cable-management bracket screws
•
Six cable-management brackets (one per bracket)
One earth lug with two 10-32 screws.
1 RJ45 to RJ45 crossover cable
1 RJ45 to DB-9 (female) adapter
One disposable wrist strap (optional)
Regulatory Compliance and Safety Information for the Cisco ASR 903 Router
Check the container for the following optional equipment:
Power cord if an AC power supply was shipped. There are no cords for the DC
•
power supply units.
T1/E1 cable connector (required only for T1/E1 interface modules)
•
Chapter 2 Preparing for Installation
OL-25178-03