Advertisement
ASSEMBLY
The CROSS WALK is shipped in the compact stowaway position. Set the CROSS WALK in a cleared area and remove
all packing materials. Make sure that all ports have been removed before you dispose of the packing materials.
Follow the instructionsbelow to convert the CROSS WALK to the operating position.No tools are required.
1. Raise the Upright (1O) to the vertical position. Slide the Lock Knob
Washer (78) onto the Lock Knob (77). Tighten the Lock Knob into the
Upright.
1
10
2. Remove the paper backing
from
the Wrench Clip (65). Press the
Wrench Clip onto the Right Roller Bracket (62) in the indicated loca-
tion. Press the Allen Wrench (66) into the Wrench Cli p.
Make sure that all parts are tightened securely before using
the
tread-
mill. Note: To protect the floor, a covering should be placed under
the treadmill.
62
65
5
Advertisement
