Selecting A Display - Furuno 1833 Operator's Manual

1.5.2

Selecting a display

1. Press the [DISP] key to show the display selection window. The icons of
modes not available are marked with an "X." PAGE1-PAGE5 are
user-arrangeable displays called "hot pages," which can you configure as you
like. For further details, see the paragraph "5.6 Hot Page Setup."
2. Rotate the [ENTER] knob to select a basic display screen or a hot page
screen.
3. If you selected a basic display screen, a group of appropriate combination
displays appear. Below are the combination screens available with the radar
display.
4. Rotate the [ENTER] knob to select display desired.
5. Push the [ENTER] knob to finish.
RADAR PLOT SNDR
PAGE1 PAGE2 PAGE3 PAGE4
· TURN KNOB TO SELECT MODE
AND PUSH KNOB TO ENTER.
· PUSH ANY SOFT KEY TO
SELECT IMAGE SOURCE.
Display screen selection window
PUSH ENTER KNOB.
Radar combination screen selection window.
1. OPERATIONAL OVERVIEW
Basic display
screens
NAV
Hot pages
PAGE5
1-11