Function Key Setup - Furuno 1833 Operator's Manual

5.3.2

Function key setup

The function keys provide one-touch execution of a desired function. The default
plotter function key settings are
Function
Key
1
2
3
4
5
If the above settings are not to your liking you may change them as follows:
1. Press the [MENU] key.
2. Press the FUNCTION KEY SETUP soft key.
3. Select the soft key you want to program, then press the EDIT soft key. A
menu shows the functions available and the current selection is highlighted.
Default Function
Start/stop recording/plotting own ship's track.
Edit mark/line.
Ruler (measure range and bearing between two
points).
Add new waypoint.
Alphanumeric waypoint list.
Function key
setting
Function
key label
Plotter function key menu
Scroll
Plotter function key options
5. CUSTOMIZING YOUR UNIT
FUNC
SOFT KEY 1
TRK: TRACK ON/OFF
EDIT
T
R
SOFT KEY 2
K
EML: EDIT MK/LINE
E
M
SOFT KEY 3
L
RUL: RULER
R
U
L
SOFT KEY 4
ADD: ADD NEW WPT
A
D
SOFT KEY 5
D
ALP: ALPHA LIST
RETURN
A
L
P
SOFT KEY 1
OFF
ADD: ADD NEW WPT
MWP: MOVE WPT
RUL: RULER
GWP: GOTO WPT
GRT: GOTO ROUTE
EML: EDIT MK/LINE
TRK: TRACK ON/OFF
TTM: TTM ON/OFF
DTT: DEL TGT TRK
ALP: ALPHA LIST
LCL: LOCAL LIST
RTE: ROUTE LIST
DBX: D. BOX ON/OFF
CHG: CHANGE CNTRL
Function
Key Label
TRK
EML
RUL
ADD
APL
KEY
5-9