Highway Display - Furuno 1833 Operator's Manual

3.1.3

Highway display

The highway display, shown in the combination displays, provides a graphic
presentation of ship's track along intended course. It is useful for monitoring
ship's progress toward a waypoint. The own ship marker shows relation between
ship and intended course. The XTE monitor shows the direction and amount
your vessel is off course – the arrow shows the direction to steer to return to
your course and the numeric the distance you are off course. Using the figure
below as an example, you would steer right 0.009 nm to return to course. To
maintain course, steer the vessel so the own ship marker stays aligned with the
intended course line.
Time-to-go
to destination
Destination waypoint
Soft keys
EDIT XT-LMT: Sets the range for XTE monitor scale. See the procedure on the
previous page for how to set.
RESET XTE: The RESET XTE enables you to restart navigation, when a
destination is set. Press the EDIT XT-LMT soft key followed by the RESET XTE
soft key. See the previous page for details.
Speed over ground, speed through water
Destination Range to
waypoint
destination waypoint
RNG
003WPT
SOG 10.0
0D 9H 59M
TTG
WPT001
0.9 nm
0 . 0 0 9 n m
XTE monitor
Shown when
direction to
steer is "left."
Highway display
3. PLOTTER OPERATION
9 9 . 9 n m
STW 10.0
kt kt
Estimated time of
23th23:59
ETA
arrival at destination
Intended
course
Own ship marker
0.9 nm
XTE range
Direction to steer
3-5