Remote Display - Furuno FR-8062 Operator's Manual

1. OPERATIONAL OVERVIEW
1.45

Remote Display

This radar may be used as a remote display by setting Input Source to Sub on the Installation
menu. When this is done, the menu and display change as described below. To display the radar
image on the remote display, transmit from the main radar.
Unavailable menu items
Menu
DIsplay
Echo
Custom 1, 2, 3
Tuning
System - Installation
System - Sector Blank 1, 2
Display appearance
The display changes as shown in the illustration below.
Pulse length
is not displayed.
0.25
0.75
NM
OFFCENTER(M)
H UP
HARBOR A/C AUTO
ES 1 EAV1
NR LOW
IR LOW
Stand-by display modes
• The Total TX Time indication (TX TIME XXXXXX.XH) does not appear on the Normal stand-by
display.
• The "SUB" indication also appears on the Nav data stand-by display.
• The Nav data stand-by display shows the "SUB" indication but not the "WATCH" indication
(including time remaining).
1-60
Menu items not available with the remote display
Watchman
Pulse Length, Antenna Speed, 2nd Echo Rejector
Pulse Length, Antenna Speed
All menu items inoperative
Tuning Initial Adjust, Auto Installation Setup, Total TX Time,
Manual MBS Adjust, Antenna Rotation
All menu items inoperative
Shown when display
unit functions as
remote display.
359.9°
M
Display indications for remote display
Unavailable menu item(s)
Neither tuning indicator
nor tuning bar is displayed.
SUB
GAIN AUTO
SEA AUTO
RAIN AUTO
ZOOM
WATCH (incl. time
remaining) is not
displayed.
2ND ECHO
is not displayed.