Advertisement
Quick Links
Advertisement
Related Manuals for Furman PL-PRO D II
Summary of Contents for Furman PL-PRO D II
- Page 1 SERIES II 20 amp powER CondItIonERS...
- Page 2 SERIES II 20 amp powER CondItIonERS Furman Series II Features • SMP+ with extreme voltage shutdown • LiFT (Linear Filtering Technology) with zero ground contamination • Eight rear panel outlets and one front panel outlet • BNC connector on the rear panel allows you to attach any standard (12VAC 0.5 amp) gooseneck lamp to illuminate the rear of your rack •...
-
Page 3: Safety Information
SERIES II 20 amp powER CondItIonERS I N T R O D U C T I O N Thank you for purchasing a Furman Series II Power Conditioner, and Congratulations on your choice. The Series II power conditioners feature Furman’s revolutionary Series Multi- Stage Protection Plus (SMP+) circuit, as well as our exclusive Linear Filtering Technology (LiFT). - Page 4 3. Do not place your Series II unit near heat sources such as radiators, heat registers, stoves, or other appliances that produce heat. 4. The PL-PRO II, PL-PRO D II, and PM-PRO II should only be connected to a 120 VAC, 60Hz, 20 amp grounded electrical outlet. Do not defeat the ground or change polarization of the power plug.
- Page 5 1-volt steps. The voltmeter’s accuracy is ±1.5 volt. The PL-PRO D II has a master magnetic circuit breaker switch for the front and rear outlets that is protected from accidental disconnection by a hinged cover.
- Page 6 O P E R AT I O N Retractable Rack Lights, Rear panel Lamp and dimmer Control: The PL-PRO II and PL-PRO D II utilize a dimmer control for the two retractable front panel light tubes. The dimmer knob controls the brightness of both light fixtures.
- Page 7 R.M.S. technology, the current readings are accurate regardless of load conditions (capacitive, inductive or resistive). notE: The PL-PRO II, PL-PRO D II, and PM- PRO D II, do not compensate for high or low line voltage. If you frequently move your rack to...
- Page 8 Furman’s clamping voltage rating will be compromised. The unit must be returned to Furman Sound, or an authorized Furman Service center for repair. notE: If the mains power is above the high...
-
Page 9: Three-Year Limited Warranty
THREE YEAR LIMITED WARRANTY Furman Sound, LLC., having its principal place of business at 1997 South McDowell Blvd., Petaluma, CA 94954 (“Manufacturer”) warrants its 20 amp Series II Power Conditioners (the “Product”) as follows:... - Page 10 Manufacturer at its sole discretion if the product is modified in any way without written authorization from Furman Sound. This warranty also does not apply to Products upon which repairs have been affected or attempted by persons other than pursuant to written authorization by Manufacturer.
-
Page 11: Specifications
125 VAC typically) Voltmeter Accuracy: PL-PRO II only: ±2 VAC, calibrated with internal trimpot adjustments PL-PRO D II & PM-PRO II: ±1.5 VAC, PM-PRO II Current meter: ±0.5 amp Spike Protection Modes: Line to neutral, zero ground leakage Spike Clamping Voltage: 188 Vpk @ 3,000 amps, (133 VAC RMS) (“E”... - Page 12 SERIES II 20 amp powER CondItIonERS Furman Sound, LLC. 1997 South McDowell Blvd. Petaluma, California 94954-6919 USA Phone: 707-763-1010 Fax: 707-763-1310 Web: www.furmansound.com 111804-C E-mail: info@furmansound.com...