Resetting And Disabling Router Settings - 3Com 9000 SX User Manual

Table 8-5 Router Show Commands (continued)
Command
show rip stat {vlan <name> | all}
Resetting and
Disabling Router
Settings
Table 8-6 Router Reset and Disable Commands
Command
clear iparp [<ipaddress> | vlan
<name> | all]
clear ipfdb [<ipaddress> <netmask>
| vlan <name> | all]
disable bootp vlan [<name> | all] Disables the generation and processing of BOOTP packets.
disable bootprelay
disable icmp redirects {vlan
<name> | all}
disable icmp unreachables
disable icmp useredirects
disable ipforwarding {vlan <name>
| all}
disable ipforwarding broadcast {vlan
<name> | all}
disable irdp {vlan <name> | all} Disables the generation of router advertisement messages on
(continued)
Description
Displays RIP-specific statistics. Statistics include the
following per interface:
To return router settings to their defaults and disable routing
functions, use the commands listed in Table 8-6.
Description
Removes dynamic entries in the IP ARP table. Permanent IP ARP
entries are not affected.
Removes the dynamic entries in the IP forwarding database.
Disables the forwarding of BOOTP requests.
Disables the generation of ICMP redirects on one or more VLANs.
Disables the generation of ICMP unreachable messages on one or
more VLANs.
Disables the changing of routing table information when an ICMP
redirect message is received.
Disables routing for one or more VLANs.
Disables routing of broadcasts to other networks.
one or more VLANs.

Resetting and Disabling Router Settings

Packets transmitted
Packets received
Bad packets received
Bad routes received
Number of RIP peers
Peer information
8-13