Status Monitoring And Statistics - 3Com 9000 SX User Manual

9-2 C 9: S
HAPTER TATUS
Table 9-1 Switch Monitoring Commands (continued)
Command
show ip config {vlan <name> | all} Displays configuration information for one or more VLANs,
show iparp {<ip_address> | vlan
<name> | all | permanent}
show ipfdb {<ipaddress> | vlan
<name> | all}
show iproute vlan {<name> | all |
permanent}
show ipstats {vlan [<name> | all]} Displays statistics of packets handled by the CPU, including the
show log {<priority>} {<subsystem>} Displays the current snapshot of the log. Options include:
show log config
show management
show memory
(continued)
M S
ONITORING AND TATISTICS
Description
including the following:
IP address, subnet mask
IP forwarding information
BOOTP configuration
VLAN name, VLANid
Displays the current Address Resolution Protocol (ARP) cache
for a selected IP address, VLAN, or all entries. With no options,
information for all VLANs is displayed. Information displayed
includes IP address, MAC address, aging timer value, VLAN
name, VLANid, and port number.
Displays the contents of the IP forwarding database table. Use
for technical support purposes.
Displays the contents of the IP routing table.
following:
inpackets, outpackets
ICMP/IGMP statistics
IRDP statistics
priority — Filters the log to display messages with the
selected priority or higher (more critical). Priorities include
critical, warning, and informational. If not specified,
informational priority messages and higher are displayed.
subsystem — Filters the log to display messages associated
with the selected Switch subsystem. Subsystems include
Syst, STP Brdg, SNMP, Telnet, VLAN, and Port. If not
specified, all subsystems are displayed.
Displays the log configuration, including the syslog host IP
address, the priority level of messages being logged locally,
and the priority level of messages being sent to the syslog
host.
Displays network management configuration and statics
including enable/disable states for Telnet and SNMP, SNMP
community strings, authorized SNMP station list, SNMP trap
receiver list, and logon statistics.
Displays summary system configuration and memory utilization
statistics for the CPU system DRAM.