Galaxy 3 Series Installation Manual
Printer Interface Module-A134/A161
The Printer Interface module allows the Galaxy to be connected to a serial printer and the contents of the
event log and the programming details of the system to be printed out. The module is available with either a:
•
25 way sub D type RS232 serial connector (part number A161)
OR
•
6 pin DIN plug (part number A134)
The printer must have a serial interface port. The printer protocol must be set to:
Protocol
Setting
Start Bit
ON
Stop Bit
ON
Word Length
8 Data Bits
Parity
None
Baud Rate
1200
Table 3-13. Printer Protocol Settings
3-15
Printer Interface