Changing the Status of Option 82 by Using the CLI
Changing the Status of Option 82 by Using SNMP
MIB
cjnipv4serv.mib
610-0184-095
2. Enable or disable the suboptions as appropriate in the DHCP
Option - Circuit Info and DHCP Option 82 - Agent Info fields.
To use the CLI to change the status of option 82, enter Global
Configuration mode and use the following commands:
To enable suboption 1, use the following command:
>(config)# ip dhcp circuit-info
To enable suboption 2, use the following command:
>(config)# ip dhcp agent-info
To disable suboption 1, use the following command:
>(config)# no ip dhcp circuit-info
To disable suboption 2, use the following command:
>(config)# no ip dhcp agent-info
* Note: For information on how to enter Global Configuration
command mode, see "Accessing/Exiting the Command
Modes" in chapter 1 of Cajun P550R/P880/P882 Command
Reference Guide.
To change the status of option 82 by using SNMP, use the MIB items
that are listed in Table 3. These MIB items are defined in
cjnipv4serv.mib.
Table 3. MIB, MIB Items and OIDs for Option 82
MIB Item
cjnDHCPOpt82Sub1Enabled
cjnDHCPOpt82Sub2Enabled
June 14, 2001
OID
1.3.6.1.4.1.1751.2.43.2.5.5.1
1.3.6.1.4.1.1751.2.43.2.5.5.2
13