Troubleshooting; Autodome 600 Firmware Version Identification - Bosch AutoDome100 User Manual

3

Troubleshooting

This section provides information for issues that may arise during the upgrade process of an
AutoDome 100, 600, 700 or 800.
3.1

AutoDome 600 Firmware Version Identification

Each service pack contains a version of the files in the illustration below. The version number
of the Service Pack is sequential, but the versions of the firmware modules included in the
service pack varies. Although all files are included in a service pack, only a few of these files
are upgraded with each service pack release.
To display the current versions of the AutoDome 600 firmware files:

Bosch Security Systems, Inc.
Issue the ON-66-ENTER command twice, in quick succession.
The AutoDome displays the current firmware levels for the AutoDome files. Compare
these version numbers to the latest versions identified in the Release Notes, included
with the Service Pack to determine if the AutoDome requires an upgrade.
Bosch Security Sys. AutoDome(r)
600 Series 5.00.00.03/1.05.00.02
Day/Night 36X
SC Boot
FPGA
VCA_boot
STD Comm
No Heater
FastAddress: Not Set
Figure 3.1 Firmware File Version On-screen Display
Ref. Module Name
1 System Controller (SC)
2 AutoTracker/Motion Detection
3 System Controller (SC) Boot
4 Field Programmable Gate Array (500 series)
5 VCA Boot
Firmware Update Manual
1.00.00.00
5.00.00.03
1.13.01.05
1.02.00.01
Troubleshooting | en
Filename
SCMain.G4i
VCA_app.g4i
SCBootApp.G4i
FPGA_VCA.G4i
VCA_boot.G4i
F.01U.097.269 | 4.0 | 2012.02
23