Advanced Operations
On-screen Setup
This section describes the procedure for using the
remote controller unless otherwise specified.
With the AV receiver connected to a TV, there are two
ways of changing the settings on-screen: using the
Quick Setup or the Setup Menu (Home).
■
Quick Setup
The Quick Setup provides quick access to frequently
used settings. You can change settings and view the
current information.
■
Setup menu (Home)
The Setup menu (Home) provides a convenient way
to change the AV receiver's various settings. Settings
are organized into 9 categories.
Tip
• The on-screen menus appear only on a TV that is
connected to HDMI OUT MAIN.
Using the Quick Setup
Receiver
Enter,
/ / /
Q Setup
1
Press Receiver followed by Q Setup.
The Quick Setup will be superimposed on the TV
screen.
B D / D V D
I n p u t
A u d i o
V i d e o
I n f o r m a t i o n
L i s t e n i n g M o d e
2
Use / and Enter to make the desired
selection.
Press Q Setup to close the menu.
Press Return to return to the previous menu.
■
Input
*1
You can select input sources and view the
following information: the name of input selectors,
input assignments, the name of the device paired
with the AV receiver via Bluetooth, radio
information, and ARC function setting.
En-47
In addition, previews of the video streams coming
from HDMI inputs (HDMI IN 1/2/3/4/5) are
displayed.
*2
Use / to select an input source and view the
related information. Pressing Enter switches to
the selected input source.
■
Audio (➔ page 48)
You can change the following settings: "Bass",
"Treble", "Phase Matching Bass", "Subwoofer
Level", "Center Level", "Audyssey",
"Dynamic EQ", "Dynamic Volume", "Late
Night", "Music Optimizer" and "Cinema Filter".
■
Video
*3
Return
You can change the following settings: "Wide
Mode" and "Picture Mode
See also:
• "Picture Adjust" (➔ page 59)
■
Information
*5
You can view the information of the following
items: "Audio", "Video" and "Tuner".
■
Listening Mode
You can select the listening modes that are
grouped in the following categories: "MOVIE/TV",
"MUSIC", "GAME".
Use / to select the category and
select the listening mode. Press Enter to switch
to the selected listening mode.
Note
*1
"BLUETOOTH" cannot be selected, if you've selected
NET or USB as input selector in Zone 2.
*2
• The video preview is not displayed when:
–HDMI IN 6 is the current HDMI input source, or
–No signal is present on the current input source.
• The video of the currently-selected input is displayed on
the main screen, not on a preview thumbnail.
*3
• When the "Monitor Out" setting is set to "Sub", "Video"
cannot be selected (➔ page 51).
Advanced Operations
".
*4
*6
/
to