1. Manuals
  2. Brands
  3. Integra Manuals
  4. Receiver
  5. DTR-20.1
  6. Instruction manual

Integra DTR-20.1 Instruction Manual

Hide thumbs Also See for DTR-20.1:
Table of Contents

Advertisement

Quick Links

DTR-20.1_En_A.book Page 1 Wednesday, April 8, 2009 10:06 PM
AV Receiver
DTR-20.1
Instruction Manual

Advertisement

Table of Contents
loading

Related Manuals for Integra DTR-20.1

Summary of Contents for Integra DTR-20.1

  • Page 1 DTR-20.1_En_A.book Page 1 Wednesday, April 8, 2009 10:06 PM AV Receiver DTR-20.1 Instruction Manual...

  • Page 2: Important Safety Instructions

    DTR-20.1_En_A.book Page 2 Wednesday, April 8, 2009 10:06 PM WARNING: AVIS WARNING RISK OF ELECTRIC SHOCK RISQUE DE CHOC ELECTRIQUE TO REDUCE THE RISK OF FIRE OR ELECTRIC DO NOT OPEN NE PAS OUVRIR SHOCK, DO NOT EXPOSE THIS APPARATUS TO The lightning flash with arrowhead symbol, within an RAIN OR MOISTURE.

  • Page 3: Precautions

    DTR-20.1_En_A.book Page 3 Wednesday, April 8, 2009 10:06 PM Precautions For U.S. models 1. Recording Copyright—Unless it’s for personal use only, recording copyrighted material is illegal FCC Information for User without the permission of the copyright holder. CAUTION: 2. AC Fuse—The AC fuse inside the unit is not user- The user changes or modifications not expressly serviceable.

  • Page 4: Supplied Accessories

    DTR-20.1_En_A.book Page 4 Wednesday, April 8, 2009 10:06 PM Supplied Accessories Thank you for purchasing an Integra AV receiver. Please read this manual thoroughly before making con- nections and plugging in the unit. Following the instructions in this manual will enable you...

  • Page 5: Table Of Contents

    Connecting an RI Dock ........32 Connecting a Dock with the Universal Port Controlling Other Components connector ............32 Connecting Integra/Onkyo Components ..33 Controlling Other Components........ 80 Connecting the Power Cord ........ 33 Preprogrammed Remote Control Codes ..... 80 Entering Remote Control Codes......

  • Page 6: Features

    2EQ™, • 4 HDMI Inputs and 1 Output Audyssey Dynamic Volume™ and Audyssey Dynamic EQ™ are trademarks of Audyssey Laboratories. • Integra/Onkyo for System Control • HDTV-Ready Component Video Switching (2 Inputs/1 Output) Theater-Dimensional is a trademark of Onkyo Corporation.

  • Page 7: Multiroom Capability

    DTR-20.1_En_A.book Page 7 Wednesday, April 8, 2009 10:06 PM Multiroom Capability You can use two speaker systems with this AV receiver—a surround-sound speaker system (up to 7.1 channels) in your main listening room, a stereo speaker system in a second room, or Zone 2, as we call it. And, you can select a different audio source for each room.

  • Page 8: Front & Rear Panels

    DTR-20.1_En_A.book Page 8 Wednesday, April 8, 2009 10:06 PM Front & Rear Panels Front Panel The actual front panel has various logos printed on it. They are not shown here for clarity.
  • Page 9 DTR-20.1_En_A.book Page 9 Wednesday, April 8, 2009 10:06 PM Front & Rear Panels—Continued The page numbers in parentheses show where you can find the main explanation for each item. On/Standby button (34) Tuning, Preset, Arrow, and Enter buttons Sets the AV receiver to On or Standby. When AM or FM is selected, the Tuning [ ]/[ ] buttons are used for radio tuning, and the Preset Standby indicator (34)

  • Page 10: Display

    DTR-20.1_En_A.book Page 10 Wednesday, April 8, 2009 10:06 PM Front & Rear Panels—Continued Display For detailed information, see the pages in parentheses. SLEEP indicator (43) Lights up when the Sleep function has been set. MUTING indicator (43) Flashes while the AV receiver is muted. Listening mode and format indicators (54) Show the selected listening mode and audio input signal format.

  • Page 11: Rear Panel

    DTR-20.1_En_A.book Page 11 Wednesday, April 8, 2009 10:06 PM Front & Rear Panels—Continued Rear Panel DIGITAL IN COAXIAL 1 and 2 HDMI IN 1–4 and OUT These coaxial digital audio inputs are for HDMI (High Definition Multimedia Interface) connecting components with a coaxial digital audio connections carry digital audio and digital video.
  • Page 12 This analog audio output can be connected to the connected to the jack on another -capable analog audio input on another power amplifier. Integra/Onkyo component for remote and system FRONT L/R, CENTER, and SURR L/R control. SPEAKERS To use , you must make an analog audio...

  • Page 13: Remote Controller

    DTR-20.1_En_A.book Page 13 Wednesday, April 8, 2009 10:06 PM Remote Controller Controlling the AV receiver Setup button Used to change settings. To control the AV receiver, press the [Receiver] button to select Receiver mode. Listening Mode buttons (54) You can also use the remote controller to control Used to select the listening modes.

  • Page 14: Installing The Batteries

    • If the remote controller doesn’t work reliably, try and you want to operate another component (page 80), replacing the batteries. or when you want to operate an Integra/Onkyo com- • Don’t mix new and old batteries or different types of ponent without connection, point the remote con- troller at the other component to use it.

  • Page 15: About Home Theater

    DTR-20.1_En_A.book Page 15 Wednesday, April 8, 2009 10:06 PM About Home Theater Enjoying Home Theater Thanks to the AV receiver’s superb capabilities, you can enjoy surround sound with a real sense of movement in your own home—just like being in a movie theater or concert hall. You can enjoy DVDs featuring Dolby Digital or DTS. With analog or digital TV, you can enjoy Dolby Pro Logic IIx, DTS Neo:6, or Onkyo’s original DSP listening modes.

  • Page 16: Connecting The Av Receiver

    DTR-20.1_En_A.book Page 16 Wednesday, April 8, 2009 10:06 PM Connecting the AV receiver Using Dipole Speakers Connecting Your Speakers You can use dipole speakers for the surround left and Speaker Configuration right and surround back left and right speakers. Dipole speakers output the same sound in two directions.
  • Page 17 DTR-20.1_En_A.book Page 17 Wednesday, April 8, 2009 10:06 PM Connecting the AV receiver—Continued Speaker Connection Precautions Connecting the Speaker Cables Read the following before connecting your speakers: Terminal posts • You can connect speakers with an impedance of between 6 and 16 ohms. If you use speakers with a Strip 1/2"-5/8"...
  • Page 18 DTR-20.1_En_A.book Page 18 Wednesday, April 8, 2009 10:06 PM Connecting the AV receiver—Continued The following illustration shows which speaker should be connected to each pair of terminals for 7.1-channel playback. If you’re using only one surround back speaker, connect it to the power amplifier’s left terminals. Surround left Surround right speaker...

  • Page 19: Connecting Antenna

    DTR-20.1_En_A.book Page 19 Wednesday, April 8, 2009 10:06 PM Connecting the AV receiver—Continued Connecting the AM Loop Antenna Connecting Antenna The supplied indoor AM loop antenna is for indoor use This section explains how to connect the supplied indoor only. FM antenna and AM loop antenna, and how to connect commercially available outdoor FM and AM antennas.
  • Page 20 DTR-20.1_En_A.book Page 20 Wednesday, April 8, 2009 10:06 PM Connecting the AV receiver—Continued Connecting an Outdoor FM Antenna Connecting an Outdoor AM Antenna If you cannot achieve good reception with the supplied If good reception cannot be achieved using the supplied indoor FM antenna, try a commercially available AM loop antenna, an outdoor AM antenna can be used outdoor FM antenna instead.

  • Page 21: About Av Connections

    DTR-20.1_En_A.book Page 21 Wednesday, April 8, 2009 10:06 PM Connecting the AV receiver—Continued AV Connection Color Coding About AV Connections RCA-type AV connections are usually color coded: red, • Before making any AV connections, read the manuals white, and yellow. Use red plugs to connect right- supplied with your other AV components.

  • Page 22: Connecting Audio And Video Signals To The Av Receiver

    DTR-20.1_En_A.book Page 22 Wednesday, April 8, 2009 10:06 PM Connecting the AV receiver—Continued Connecting Audio and Video Signals to the AV receiver By connecting both the audio and video outputs of your DVD player and other AV components to the AV receiver, you can switch the audio and video signals simultaneously simply by changing the input source on the AV receiver.

  • Page 23: Connecting Components With Hdmi

    DTS-HD Master Audio) Your DVD player must be able to output these formats from its HDMI OUT. ■ Integra/Onkyo for System Control , which stands for Remote Interactive over HDMI, is the name of the system control function found on Inte- gra/Onkyo components.

  • Page 24: Audio Signals

    DTR-20.1_En_A.book Page 24 Wednesday, April 8, 2009 10:06 PM Connecting the AV receiver—Continued Making HDMI Connections Step 1: Use HDMI cables to connect the AV receiver’s HDMI jacks to your HDMI-compatible DVD/BD player, TV, projector, and so on. Step 2: Assign each HDMI IN to an input selector in the HDMI Input Setup (see page 38).

  • Page 25: Connecting A Tv Or Projector

    DTR-20.1_En_A.book Page 25 Wednesday, April 8, 2009 10:06 PM Connecting the AV receiver—Continued Connecting a TV or Projector Step 1: Video Connection Choose a video connection that matches your TV ( ), and then make the connection. Step 2: Audio Connection Choose an audio connection that matches your TV ( , , or ), and then make the connection.

  • Page 26: Connecting A Dvd/Bd Player

    DTR-20.1_En_A.book Page 26 Wednesday, April 8, 2009 10:06 PM Connecting the AV receiver—Continued Connecting a DVD/BD player Step 1: Video Connection Choose a video connection that matches your DVD/BD player ( , and then make the connection. You must connect the AV receiver to your TV with the same type of connection. Step 2: Audio Connection Choose an audio connection that matches your DVD/BD player ( , , or...

  • Page 27: Connecting A Vcr Or Dvr For Playback

    DTR-20.1_En_A.book Page 27 Wednesday, April 8, 2009 10:06 PM Connecting the AV receiver—Continued Connecting a VCR or DVR for Playback With this hookup, you can use your VCR’s tuner to listen to your favorite TV programs via the AV Hint! receiver, useful if your TV has no audio outputs.

  • Page 28: Connecting A Vcr Or Dvr For Recording

    DTR-20.1_En_A.book Page 28 Wednesday, April 8, 2009 10:06 PM Connecting the AV receiver—Continued Connecting a VCR or DVR for Recording Step 1: Video Connection Make the video connection . The video source to be recorded must be connected to the AV receiver via the same type of connection.

  • Page 29: Connecting A Satellite, Cable, Terrestrial Set-Top Box, Or Other Video Source

    DTR-20.1_En_A.book Page 29 Wednesday, April 8, 2009 10:06 PM Connecting the AV receiver—Continued Connecting a Satellite, Cable, Terrestrial Set-top box, or Other Video Source With this hookup, you can use your satellite or cable receiver to listen to your favorite TV programs Hint! via the AV receiver, which is useful if your TV has no audio outputs.

  • Page 30: Connecting A Cd Player Or Turntable

    DTR-20.1_En_A.book Page 30 Wednesday, April 8, 2009 10:06 PM Connecting the AV receiver—Continued Connecting a CD Player or Turntable ■ CD Player or Turntable (MM) with Built-in Phono Preamp Step 1: Choose a connection that matches your CD player ( , , or ).

  • Page 31: Connecting A Cassette, Cdr, Minidisc, Or Dat Recorder

    DTR-20.1_En_A.book Page 31 Wednesday, April 8, 2009 10:06 PM Connecting the AV receiver—Continued Connecting a Cassette, CDR, MiniDisc, or DAT Recorder Step 1: Choose a connection that matches your recorder ( , , or ), and then make the connection. Connect one or the other These connections must be OPTICAL...

  • Page 32: Connecting An Ri Dock

    DTR-20.1_En_A.book Page 32 Wednesday, April 8, 2009 10:06 PM Connecting the AV receiver—Continued Connecting an RI Dock ■ If Your iPod Doesn’t Support Video: Not all iPod models output video. Connect your RI Dock’s audio output jacks to the AV receiver’s TV/TAPE IN L/R jacks. For information about which iPod models are supported by the RI Dock, see the RI Dock’s instruction manual.

  • Page 33: Connecting Integra/Onkyo Components

    DTR-20.1_En_A.book Page 33 Wednesday, April 8, 2009 10:06 PM Connecting the AV receiver—Continued Connecting Integra/Onkyo Components Step 1: Make sure that each Integra/Onkyo component is connected to the AV receiver with an analog audio cable (RCA). Step 2: Make the necessary connections (see illustration below).

  • Page 34: Turning On The Av Receiver

    DTR-20.1_En_A.book Page 34 Wednesday, April 8, 2009 10:06 PM Turning On the AV receiver On/Standby On/Standby Standby indicator Receiver Turning On and Standby On the AV receiver, press the [On/Standby] button. Remote AV receiver controller On the remote controller, press the [Receiver] button, followed by the [On/Standby] button.

  • Page 35: First Time Setup

    DTR-20.1_En_A.book Page 35 Wednesday, April 8, 2009 10:06 PM First Time Setup This section explains the settings that you need to make before using the AV receiver for the very first time. Measurement Positions Audyssey 2EQ™ Room Correction and Speaker Setup To create a listening environment in which several people can enjoy your home theater simultaneously, With the supplied calibrated microphone,...
  • Page 36 DTR-20.1_En_A.book Page 36 Wednesday, April 8, 2009 10:06 PM First Time Setup—Continued Using Audyssey 2EQ™ Notes: ™ • Before starting Audyssey 2EQ Automatic Speaker Setup, arrange the room and connect the speakers as Notes: you would for enjoying movies. Changes to the room •...
  • Page 37 DTR-20.1_En_A.book Page 37 Wednesday, April 8, 2009 10:06 PM First Time Setup—Continued • The right surround back speaker has been detected but When the following display appears, the left surround back speaker hasn’t. move the speaker setup microphone to measurement point (page 35), and ❏...

  • Page 38: Hdmi Input Setup

    DTR-20.1_En_A.book Page 38 Wednesday, April 8, 2009 10:06 PM First Time Setup—Continued HDMI Input Setup Use the Up and Down [ ]/[ ] buttons to select “1-1.HDMI”, and If you connect a video component to an HDMI IN, you then press [Enter]. must assign that input to an input selector.

  • Page 39: Component Video Input Setup

    DTR-20.1_En_A.book Page 39 Wednesday, April 8, 2009 10:06 PM First Time Setup—Continued Component Video Input Setup Use the Up and Down [ ]/[ ] buttons to select If you connect a video component to a COMPONENT “1-2.Component”, and then VIDEO IN, you must assign that input to an input press [Enter].

  • Page 40: Digital Input Setup

    DTR-20.1_En_A.book Page 40 Wednesday, April 8, 2009 10:06 PM First Time Setup—Continued Digital Input Setup Use the Up and Down [ ]/[ ] buttons to select “1-3.Digital”, If you connect a component to a digital audio input, you and then press [Enter]. must assign that input to an input selector.

  • Page 41: Changing The Input Display

    DTR-20.1_En_A.book Page 41 Wednesday, April 8, 2009 10:06 PM First Time Setup—Continued Changing the Input Display Press and hold down the [TV/Tape], [Game] or [VCR/DVR] If you connect an -capable Onkyo RI Dock to the input selector button (about 3 TV/Tape IN, Game IN or VCR/DVR IN jacks, for seconds) to change the setting.

  • Page 42: Basic Operations

    DTR-20.1_En_A.book Page 42 Wednesday, April 8, 2009 10:06 PM Basic Operations Basic AV receiver Operation Master Volume Input Selector Receiver VOL / Input selector Use the AV receiver’s input selector buttons to select an input source. To select an input source with the remote controller, press its [Receiver] Remote AV receiver controller...

  • Page 43: Setting The Display Brightness

    40_BasicOpe_En.fm 43 ページ ２００９年４月９日　木曜日　午前９時２７分 Basic Operations—Continued This section explains functions that can be used with any Muting the AV receiver input source. You can temporarily mute the output of the AV receiver. Press the [Receiver] button, and then press the remote Display controller’s [Muting] button.

  • Page 44: Using Headphones

    40_BasicOpe_En.fm 44 ページ ２００９年４月９日　木曜日　午前９時２７分 Basic Operations—Continued Using Headphones Displaying Source Information For private listening, you can connect a pair of stereo You can display various information about the current headphones (1/4-inch phone plug) to the AV receiver’s input source as follows. Phones jack.

  • Page 45: Specifying The Digital Signal Format

    DTR-20.1_En_A.book Page 45 Wednesday, April 8, 2009 10:06 PM Basic Operations—Continued Specifying the Digital Signal Format Press the [Receiver] button, and then press and hold [Audio] The following table shows the display indicator for each button for about 8 seconds. digital signal format.

  • Page 46: Listening To The Radio

    DTR-20.1_En_A.book Page 46 Wednesday, April 8, 2009 10:06 PM Listening to the Radio AM/FM Frequency Step Setup Use the Up and Down [ ]/[ ] buttons to select “FM/AM”. Receiver Use the Left and Right [ ]/[ ] Enter buttons to select: 200k/10k: Setup Select if 200k/10k steps are...

  • Page 47: Listening To Am/Fm Stations

    DTR-20.1_En_A.book Page 47 Wednesday, April 8, 2009 10:06 PM Listening to the Radio—Continued ■ Manual Tuning Mode Listening to AM/FM Stations Press the [Tuning Mode] button Tuner Tuning so that the AUTO indicator disappears from the display. Press and hold the Tuning Up or Down [ ]/[ ] button.
  • Page 48 DTR-20.1_En_A.book Page 48 Wednesday, April 8, 2009 10:06 PM Listening to the Radio—Continued ■ Tuning into Stations by Frequency Displaying AM/FM Radio Information You can tune into AM and FM stations directly by entering the appropriate frequency. Display Tuner Press the [Display] button to display the available information.

  • Page 49: Presetting Am/Fm Stations

    DTR-20.1_En_A.book Page 49 Wednesday, April 8, 2009 10:06 PM Listening to the Radio—Continued Selecting Presets Presetting AM/FM Stations Preset Memory Preset You can store a combination of up to 40 of your favorite AM and FM radio stations. Tune into the AM or FM station you want to store as a preset.

  • Page 50: Up-A1 Series Dock For Ipod

    DTR-20.1_En_A.book Page 50 Wednesday, April 8, 2009 10:06 PM UP-A1 series Dock for iPod ■ Adjusting the iPod Adapter About the UP-A1 series Dock The iPod adapter needs to be adjusted to match your With the UP-A1 series Dock (sold separately), you can particular iPod.

  • Page 51: Controlling Ipod

    DTR-20.1_En_A.book Page 51 Wednesday, April 8, 2009 10:06 PM UP-A1 series Dock for iPod—Continued Operating Notes: Controlling iPod • Before selecting a different input source, stop iPod playback to prevent the AV receiver from selecting the By pressing the Remote Mode button that’s been pro- grammed with the remote control code for your Dock, iPod input source by mistake.
  • Page 52 DTR-20.1_En_A.book Page 52 Wednesday, April 8, 2009 10:06 PM UP-A1 series Dock for iPod—Continued Status messages Arrow [ ]/[ ] and Enter buttons Used to navigate menus and select items. ❏ The AV receiver is checking the connection Previous [ ] button with the dock Restarts the current song.

  • Page 53: Recording

    DTR-20.1_En_A.book Page 53 Wednesday, April 8, 2009 10:06 PM Recording Recording from Different AV Sources This section explains how to record the input source and how to record audio and video from separate sources. You can overdub audio onto your video recordings by Notes: simultaneously recording audio and video from two •...

  • Page 54: Using The Listening Modes

    DTR-20.1_En_A.book Page 54 Wednesday, April 8, 2009 10:06 PM Using the Listening Modes Selecting with the Remote Controller Selecting the Listening Modes For a description of each listening mode, see “About the Listening Modes” on page 59. • The Dolby Digital and DTS listening modes can only be selected if your DVD player is Movie/TV Stereo...

  • Page 55: Listening Modes Available For Each Source Format

    DTR-20.1_En_A.book Page 55 Wednesday, April 8, 2009 10:06 PM Using the Listening Modes—Continued Listening Modes Available for Each Source Format The Speaker layout illustration shows which speakers are set to active in the “Sp Config” setting (see page 61). Front L Front R Speaker Speaker...
  • Page 56 DTR-20.1_En_A.book Page 56 Wednesday, April 8, 2009 10:06 PM Using the Listening Modes—Continued Stereo Source ✔: Available Listening Modes Speaker layout Listening Mode Button ✔ ✔ ✔ ✔ Direct ✔ ✔ ✔ ✔ Stereo ✔ ✔ ✔ ✔ Mono PLII/PLIIx ✔...
  • Page 57 DTR-20.1_En_A.book Page 57 Wednesday, April 8, 2009 10:06 PM Using the Listening Modes—Continued 5.1 channel Sources ✔: Available Listening Modes Speaker layout Listening Mode Button ✔ ✔ ✔ ✔ Direct ✔ ✔ ✔ ✔ Stereo ✔ ✔ ✔ ✔ Mono DolbyDigital/ DolbyDigital Plus/TrueHD/...
  • Page 58 DTR-20.1_En_A.book Page 58 Wednesday, April 8, 2009 10:06 PM Using the Listening Modes—Continued 7.1 channel Sources ✔: Available Listening Modes Speaker layout Listening Mode Button ✔ ✔ ✔ ✔ Direct ✔ ✔ ✔ ✔ Stereo ✔ ✔ ✔ ✔ Mono Multichannel/ DolbyDigital Plus/TrueHD/...

  • Page 59: About The Listening Modes

    DTR-20.1_En_A.book Page 59 Wednesday, April 8, 2009 10:06 PM Using the Listening Modes—Continued Dolby Digital Plus About the Listening Modes Developed for use with HDTV, including the new video The AV receiver’s listening modes can transform your disc formats Blu-ray and HD DVD, this is the latest listening room into a movie theater or concert hall, with multichannel audio format from Dolby.
  • Page 60 DTR-20.1_En_A.book Page 60 Wednesday, April 8, 2009 10:06 PM Using the Listening Modes—Continued DTS-ES Matrix Onkyo Original DSP Modes This mode is for use with DTS-ES Matrix soundtracks, Orchestra which use a matrix-encoded back-channel for 6.1/7.1- Suitable for classical or operatic music, this mode channel playback.

  • Page 61: Advanced Setup

    DTR-20.1_En_A.book Page 61 Wednesday, April 8, 2009 10:06 PM Advanced Setup Common Procedures in Setup Menu Remote Press the [Receiver] button followed by indicator the [Setup] button. Use the Up and Down [ ]/[ ] buttons to Receiver select main menu, and then press [Enter]. Use the Up and Down [ ]/[ ] buttons to select the function, and then press the Enter...
  • Page 62 DTR-20.1_En_A.book Page 62 Wednesday, April 8, 2009 10:06 PM Advanced Setup—Continued 2ch: Select if two (left and right) surround back speakers are connected. SurrBack ch 1ch: Select if only one surround back L speaker is connected. *1 If the “Subwoofer” setting is set to “No”, the “Front” setting is fixed at “Full Band”. *2 If the “Front”...
  • Page 63 DTR-20.1_En_A.book Page 63 Wednesday, April 8, 2009 10:06 PM Advanced Setup—Continued 2-3. Level Cal (Speaker Levels Calibration) These settings are set automatically by the Audyssey 2EQ™ Room Correction and Speaker Setup function (see page 35). You can set the volume level of each speaker so that all speakers can be heard equally at the listening position. A pink noise test tone is output by the front left speaker.

  • Page 64: Audio Adjust Settings

    DTR-20.1_En_A.book Page 64 Wednesday, April 8, 2009 10:06 PM Advanced Setup—Continued Audio Adjust Settings With the Audio Adjust functions and settings, you can adjust the sound and listening modes as you like. 3. Audio Adjust 3-1. Mux/Mono (Multiplex/Mono) Input (Mux) Main: The main channel is output (default).
  • Page 65 60_AdvncedSet_En.fm 65 ページ ２００９年４月９日　木曜日　午前９時２８分 Advanced Setup—Continued 3-3. DTS Neo:6 Music Center Image 0 to 5 (default: 2) The DTS Neo:6 Music listening mode creates 6-channel surround sound from 2-channel stereo sources. With this setting, you can specify by how much the front left and right channel output is attenuated in order to create the center channel.

  • Page 66: Source Setup

    60_AdvncedSet_En.fm 66 ページ ２００９年４月９日　木曜日　午前９時２８分 Advanced Setup—Continued A/V Sync Source Setup When using your DVD player’s progressive scanning This section explains items on the “Source Setup” menu. function, you may find that the picture and sound are out Items can be set individually for each input selector. of sync.

  • Page 67: Assigning Listening Modes To Input Sources

    60_AdvncedSet_En.fm 67 ページ ２００９年４月９日　木曜日　午前９時２８分 Advanced Setup—Continued Assigning Listening Modes to Input A/PCM: With this setting, you can specify the listening mode to be used when an analog (CD, Sources TV, LD, VHS, MD, turntable, radio, cassette, You can assign a default listening mode to each input cable, satellite, etc.) or PCM digital (CD, DVD, source that will be selected automatically when you etc.) audio signal is played.

  • Page 68: Miscellaneous (Volume) Setup

    60_AdvncedSet_En.fm 68 ページ ２００９年４月９日　木曜日　午前９時２８分 Advanced Setup—Continued Miscellaneous (Volume) Setup This section explains the items on the “Miscellaneous” menu. Press the [Receiver] button followed by the [Setup] button. Use the Up and Down [ ]/[ ] buttons to select “6. Miscellaneous”, and then press [Enter].

  • Page 69: Hardware Setup

    • When the “AudioTVOut” setting is set to , or “ ” When several Integra/Onkyo components are used in the “ TV Ctrl” is set to “On” and you’re listening through same room, their remote ID codes may overlap. To your TV’s speakers (see page 24), if you turn up the...
  • Page 70 HDMI input will be output by the HDMI, is the name of the system control function HDMI OUT for playback on the TV or other found on Integra/Onkyo components. The AV receiver component that’s connected to the HDMI OUT. can be used with CEC (Consumer Electronics •...

  • Page 71: Lock Setup

    DTR-20.1_En_A.book Page 71 Wednesday, April 8, 2009 10:06 PM Advanced Setup—Continued Note: After changing the settings of the “HDMI Ctrl” , or , turn off the power to all “Power Ctrl” “TV Ctrl” connected pieces of equipment and then turn them on again.

  • Page 72: Using The Audio Settings

    DTR-20.1_En_A.book Page 72 Wednesday, April 8, 2009 10:06 PM Advanced Setup—Continued Using the Audio Settings You can change various audio settings by pressing the [Audio] button. Note: When the “AudioTVOut” setting is set to “On” (page 69), the [Audio] button is disabled. Press the [Receiver] button followed by the [Audio] button.
  • Page 73 DTR-20.1_En_A.book Page 73 Wednesday, April 8, 2009 10:06 PM Advanced Setup—Continued CinemaFILTER With the CinemaFILTER, you can soften overly bright movie soundtracks, which are typically mixed for reproduction in a movie theater. CinemaFILTER can be used with the following listening modes: Dolby Digital, Dolby Digital EX, Dolby Digital Plus, TrueHD, Dolby Pro Logic IIx Movie, Dolby Pro Logic II Movie, Multichannel, DTS, DTS-ES, DTS Neo:6 Cinema, DTS 96/24, Neo:6, DTS-HD High Resolution, DTS-HD Master and DTS Express.

  • Page 74: Zone 2

    DTR-20.1_En_A.book Page 74 Wednesday, April 8, 2009 10:06 PM Zone 2 In addition to your main listening room, you can also enjoy playback in the other room, or as we call Zone 2. And, you can select a different source for each room. Connecting Zone 2 Setting the Zone2 Out This setup allows 5.1-channel playback in your main...

  • Page 75: Using Zone 2

    70_Zone2_En.fm 75 ページ ２００９年４月９日　木曜日　午前９時２９分 Zone 2—Continued Using Zone 2 When you’ve finished, press the [Setup] button. This section explains how to turn Zone 2 on and off, how Setup closes. to select an input source for Zone 2, and how to adjust the volume for Zone 2.
  • Page 76 70_Zone2_En.fm 76 ページ ２００９年４月９日　木曜日　午前９時２９分 Zone 2—Continued Controlling Zone 2 with the Remote Adjusting the Volume of Zones Controller On the remote controller, press Remote the [Zone 2] button, and then use controller the VOL [ ]/[ ] button. On/Standby Zone2 Input Selector Note:...
  • Page 77 70_Zone2_En.fm 77 ページ ２００９年４月９日　木曜日　午前９時２９分 Zone 2—Continued Adjusting the Tone and Balance of Zone 2 Zone 2 Tone On the AV receiver, press the [Zone 2] button. AV receiver Press the AV receiver’s [Tone] button repeatedly to select “Bass”, “Treble” or “Balance”. Use the Tone Plus [+] and Minus [–] buttons to adjust the Bass, Treble or Balance.

  • Page 78: Using The 12V Triggers

    DTR-20.1_En_A.book 78 ページ ２００９年４月２１日　火曜日　午後５時４７分 Zone 2—Continued Using the 12V Triggers Use the Up and Down [ ]/[ ] buttons to select “12V Trg A, B, The 12V triggers A, B, and C can be used to turn on 12V or C”, and then press [Enter]. trigger-capable components automatically when they are selected as the input source.

  • Page 79: Using The Remote Controller In Zone 2 And Multiroom Control Kits

    DTR-20.1_En_A.book Page 79 Wednesday, April 8, 2009 10:06 PM Zone 2—Continued Using a Multiroom Kit with a Cabinet Using the Remote Controller in Zone 2 and Multiroom Control Kits In this setup, the IR receiver picks up the infrared signals from the remote controller and feeds them to the AV To control the AV receiver with the remote controller receiver located in the cabinet via the connecting block.

  • Page 80: Controlling Other Components

    • Only TV remote control codes can be pages indicated. entered for the [TV] button. • Apart from the [Receiver], [TV], and Integra/Onkyo DVD/BD player (page 83) [Zone 2] buttons, remote control (3 seconds) Integra/Onkyo CD player (page 86) codes from any category can be...

  • Page 81: Resetting The Remote Controller

    AV receiver, and preprogrammed code is restored. operate the component. If you want to control an Integra/Onkyo component by Resetting the Remote Controller pointing the remote controller directly at it, or you want to control an Integra/Onkyo component that’s not You can reset the remote controller to its default settings.

  • Page 82: Controlling A Tv

    DTR-20.1_En_A.book Page 82 Wednesday, April 8, 2009 10:06 PM Controlling Other Components—Continued Controlling a TV By pressing the [TV] button that’s been programmed On/Standby, TV [ ] buttons with the remote control code for your TV (TV/DVD Set the TV to On or Standby. combination or TV/VCR combination), you can control TV VOL [ ]/[ ] button your TV with the following buttons.

  • Page 83: Controlling A Dvd Player, Or Dvd Recorder

    Set the TV to On or Standby. The [DVD/BD] button is preprogrammed with the TV [Input] button remote control code for controlling an Integra/Onkyo Selects the TV’s external inputs. DVD player. TV VOL [ ]/[ ] button For details on entering a remote control code for a Adjust the TV’s volume.

  • Page 84: Controlling A Vcr Or Pvr

    DTR-20.1_En_A.book Page 84 Wednesday, April 8, 2009 10:06 PM Controlling Other Components—Continued Mode] buttons will work as colored or A, B, C, D CLR button buttons. In this case, these buttons cannot be used to Cancels functions and clears entered numbers. set repeat playback, random playback, or select play Notes: modes.

  • Page 85: Controlling A Satellite Receiver Or Cable Receiver

    DTR-20.1_En_A.book Page 85 Wednesday, April 8, 2009 10:06 PM Controlling Other Components—Continued Controlling a Satellite Receiver or Cable Receiver By pressing the Remote Mode button that’s been On/Standby button programmed with the remote control code for your Set the component to On or Standby. satellite receiver, cable receiver, or DVD recorder Guide button (DBS/PVR combination or cable/PVR combination),...

  • Page 86: Controlling A Cd Player

    Used to navigate menus and select items. The [CD] button is preprogrammed with the remote Setup button* control code for controlling an Integra/Onkyo CD Used to access the Integra/Onkyo CD player’s player. settings. For details on entering a remote control code for a Playback buttons different component, see page 80.

  • Page 87: Controlling An Ri Dock

    DTR-20.1_En_A.book Page 87 Wednesday, April 8, 2009 10:06 PM Controlling Other Components—Continued Controlling an RI Dock By pressing the Remote Mode button that’s been pro- • Your iPod may not respond the first time you press this but- grammed with the remote control code for your Dock, ton, in which case you should press it again.

  • Page 88: Controlling A Cassette Recorder

    DTR-20.1_En_A.book Page 88 Wednesday, April 8, 2009 10:06 PM Controlling Other Components—Continued Controlling a Cassette Recorder By pressing the Remote Mode button that’s been On twin cassette decks, only Deck B can be controlled. programmed with the remote control code for your On/Standby button cassette recorder, you can control your cassette recorder Turns the cassette recorder on or off.

  • Page 89: Troubleshooting

    DTR-20.1_En_A.book Page 89 Wednesday, April 8, 2009 10:06 PM Troubleshooting If you have any trouble using the AV receiver, look for a • Check the volume (page 42). The AV receiver is solution in this section. If you can’t resolve the issue designed for home theater enjoyment and has a wide yourself, contact the dealer.
  • Page 90 DTR-20.1_En_A.book Page 90 Wednesday, April 8, 2009 10:06 PM Troubleshooting—Continued • Check the “2-1. Sp Config (Speaker Configuration)” • When DTS program material ends and the DTS (page 61). bitstream stops, the AV receiver remains in DTS listening mode and the DTS indicator remains on. The surround back speakers produce no sound This is to prevent noise when you use the pause, fast •...
  • Page 91 AV receiver. Be sure to enter the appropriate remote tracks. control code first (page 81). • To control an Integra/Onkyo component that’s not Recording connected via , or another manufacturer’s Can’t record component, point the remote controller at that •...
  • Page 92 5 seconds, and then plug it back in again. Integra/Onkyo is not responsible for damages (such as CD rental fees) due to unsuccessful recordings caused by this unit’s malfunction. Before you record important data, make sure that the material will be recorded correctly.

  • Page 93: Specifications

    DTR-20.1_En_A.book Page 93 Wednesday, April 8, 2009 10:06 PM Specifications ■ Video Inputs Amplifier Section HDMI IN 1, IN 2, IN 3, IN 4 Rated Output Power Component IN 1, IN 2 All channels: 90 watts minimum continuous power Composite DVD/BD, VCR/DVR, CBL/SAT, GAME per channel, 8 ohm loads, 2 channels driven from 20Hz to 20kHz, with a...
  • Page 94 DTR-20.1_En_A.book Page 94 Wednesday, April 8, 2009 10:06 PM Memo...
  • Page 95 DTR-20.1_En_A.book Page 95 Wednesday, April 8, 2009 10:06 PM Memo...
  • Page 96 DTR-20.1_En_A.book Page 96 Wednesday, April 8, 2009 10:06 PM Integra Division of ONKYO U.S.A. CORPORATION 18 park Way, Upper Saddle River, N.J. 07458, U.S.A. Tel: 201-818-9200 Fax: 201-785-2650 http://www.integrahometheater.com Integra Division of ONKYO CORPORATION Y0904-2 Sales & Product Planning Div.: 2-1, Nisshin-cho, Neyagawa-shi, OSAKA 572-8540, JAPAN...

Table of Contents