Color Registration Solenoid; Removing The Color Registration Solenoid - Xerox 1235DT - Phaser Color Solid Ink Printer Service Manual
Network color printer phaser 1235 series
Hide thumbs
Also See for 1235DT - Phaser Color Solid Ink Printer:
- Brochure & specs (4 pages) ,
- Advanced features and troubleshooting manual (144 pages) ,
- Service quick reference manual (13 pages)
Table of Contents
Advertisement
Color registration solenoid
Warning
Switch off the power and disconnect the power cord.
1.
Remove the printer unit chassis as shown on page 97.
2.
Remove the shutter plate as explained on page 156.
3.
Disconnect the shutter solenoid in-line connector.
4.
Release the shutter solenoid harness from all cable clamps.
5.
Remove the screw securing the shutter solenoid to the printer unit
chassis.
Removing the color registration solenoid
Reverse these steps to install the color registration solenoid.
158
Phaser 1235 Network Color Printer
Advertisement
Table of Contents
Troubleshooting
