Changing The Setting Menu; Tour Of The Setting Menu - FUNAI DRV-B2734 Owner's Manual

DRV_B2737_B2734.book Page 57 Thursday, March 31, 2005 10:04 PM

Changing the Setting menu

Tour of the Setting menu

The following table shows the items you can set and their default settings.
Use the table as a reference for efficient operation.
Setting menu
Language setting Disc Menu Language
page 58
Audio Language
Subtitle Language
Display setting FL Dimmer
page 59
Screen Saver
Audio Setting Digital Out
pages 59-60
Dynamic Range Control
Fast Forward with Audio
Parental setting Parental Lock
page 61
• Change password
Output setting Video Out
page 62
Note
• Changes you make to the Setting menu remain even after power to the unit is switched off or the disc tray is
opened or closed.
• [SETUP] will not function when the unit is turned on by pressing [STANDBY-ON] during either the DVD or VCR
timer-standby mode.
Menu items
English
Original
OFF
Bright
10 minutes
PCM 48 kHz
Dolby Digital Stream
MPEG PCM
DTS OFF
ON
OFF
All
TV System PAL
57
Default Function
Sets the disc menu language.
Sets the audio language.
Sets the subtitle language.
Sets the front display
brightness.
Sets the idling time before the screen
saver starts.
Sets whether sound recorded
at 96 kHz is down sampled to
48 kHz or not.
Sets the digital audio output
signal specification.
Sets the digital audio output
signal specification.
Sets whether DTS signal is
output or not.
Compresses the sound volume
range.
Outputs sound during fast
forward play back.
Sets the DVD parental control level.
Sets and change the password.
Sets the TV system.
EN