Rear Panel - FUNAI DRV-B2734 Owner's Manual

DRV_B2737_B2734.book Page 9 Thursday, March 31, 2005 10:04 PM

Rear Panel

1
1 Mains cable
• Connect to a standard AC outlet.
2 AV2 (DECODER) (DVD/VCR)
• Connect to VCR, camcorder, or other
Audio-Video equipment. Use a commercially
available Scart cable.
3 AV1 (TV) (DVD/VCR)
• Connect to the Scart jack on your TV. Use the
supplied Scart cable.
4 DIGITAL AUDIO OUT (DVD) (OPTICAL
(DRV-B2737 only), COAXIAL) jacks
• Connect to an amplifier with digital input jacks
such as a Dolby Digital decoder or DTS
decoder. Use a commercially available optical or
coaxial cable.
Note
• Do not touch the inner pins of the jacks on the rear panel. Electrostatic discharge may cause permanent damage
to the unit.
• This unit does not have an RF modulator.
DVD/VCR
DIGITAL
AV2(DECODER)
AUDIO OUT
OPTICAL COAXIAL
AV1(TV)
2 3 4 5
*
The unit is for the DRV-B2737.
5 AUDIO OUT jacks (DVD)
• Connect to the audio input jacks on your TV.
Use commercially available Audio cables.
6 S-VIDEO OUT jack (DVD)
• Connect to the S-Video input jack on your TV.
Use commercially available S-Video cable.
7 AERIAL (DVD/VCR)
• Connect to an antenna or cable.
8 RF OUT (DVD/VCR)
• Connect to the Aerial jack on your TV, cable box
or direct broadcast system. Use the supplied RF
cable.
9
DVD DVD/VCR
AUDIO S-VIDEO
OUT OUT
AERIAL
L
RF OUT
R
6 7 8
EN