FUNAI DRV-B2734 Owner's Manual page 60

DRV_B2737_B2734.book Page 60 Thursday, March 31, 2005 10:04 PM
Note
When playing back disc with copyright protection:
• Even if you select "96 kHz," the sound is down
sampled to 48 kHz.
Dolby Digital conversion (Default: Stream)
Digital Out - Dolby Digital Digital Out - Dolby Digital
PCM PCM
Stream Stream Stream Stream
Select a setting using
[Cursor U / D], then press [ENTER].
Your setting is activated.
PCM: Converts the Dolby Digital into PCM
(2 channel).
If your amplifier / decoder is NOT compatible
with Dolby Digital, set to "PCM".
Stream: Outputs Dolby Digital signals.
If your amplifier / decoder is compatible with
Dolby Digital, set to "Stream".
Hint
When playing back a DVD-RW disc recorded in VR
mode:
• If the audio source on a disc is in Dolby Digital
format, set "Dolby Digital" to "PCM" so that you can
switch to main audio (L), sub audio (R), or a
combination of both (L / R) using your amplifier /
decoder.
Settings for MPEG (Default: PCM)
Digital Out - - MPEG
PCM
Stream
Select a setting using
[Cursor U / D], then press [ENTER].
Your setting is activated.
PCM: Converts MPEG into PCM.
If your amplifier / decoder is NOT compatible
with MPEG, set to "PCM."
Stream: Outputs MPEG Audio signals.
If your amplifier / decoder is compatible with
MPEG, set to "Stream."
EN
Settings for DTS (Default: OFF)
Digital Out - DTS Digital Out - DTS
ON ON
OFF OFF
OFF OFF
DVD
Select a setting using
[Cursor U / D], then press [ENTER].
Your setting is activated.
ON: Outputs DTS signals.
If your amplifier / decoder is compatible with
DTS, set to "ON."
OFF: No DTS signal is output.
If your amplifier / decoder is NOT compatible
with DTS, set to "OFF."
Dynamic Range Control (Default: ON)
Set to "ON" to make the dynamic range narrower.
Playback Playback
TV Aspect TV Aspect
Parental Lock Parental Lock
Disc Menu Language Disc Menu Language
Audio Language Audio Language
Subtitle Language Subtitle Language
Digital Out Digital Out
Dynamic Range Control Dynamic Range Control
Dynamic Range Control Dynamic Range Control
Fast Forward with Audio Fast Forward with Audio
Video Out Video Out
Select a setting using
[Cursor U / D], then press [ENTER].
Your setting is activated.
The Dynamic Range Control function is effective
only with analogue audio connection.
DVD
Fast Forward with Audio (Default: OFF)
Set to "ON" to output the sound during DVD playback
at x1.5 fast forward.
Playback Playback
TV Aspect TV Aspect
Parental Lock Parental Lock
Disc Menu Language Disc Menu Language
Audio Language Audio Language
Subtitle Language Subtitle Language
Digital Out Digital Out
Dynamic Range Control Dynamic Range Control
Fast Forward with Audio Fast Forward with Audio
Fast Forward with Audio Fast Forward with Audio
Video Out Video Out
Select a setting using
[Cursor U / D], then press [ENTER].
Your setting is activated.
5
Press [SETUP] to exit.
60
DVD
DVD Dynamic Range Control Dynamic Range Control
4:3 Letter Box 4:3 Letter Box ON ON
ON ON
All All
OFF OFF
English English
Original Original
OFF OFF
ON ON
ON ON
OFF OFF
DVD
Fast Forward with Audio Fast Forward with Audio
4:3 Letter Box 4:3 Letter Box
ON ON
All All
OFF OFF OFF OFF
English English
Original Original
OFF OFF
ON ON
OFF OFF
OFF OFF
DVD
DVD