Marker Setup - FUNAI DRV-B2734 Owner's Manual

DRV_B2737_B2734.book Page 42 Thursday, March 31, 2005 10:04 PM
3
Press [PLAY P] to resume playback.
Note
• Only step by step forward is available when playing
back Video CDs.
Slow forward / Slow reverse playback
Video
DVD-V DVD-V DVD-RW DVD-RW
D D VD+R DVD+RW VD+RW W D D VD+R DVD+R VD+R
1
During playback, press [PAUSE p],
then press [f] or [r].
Each time you press [f] or [r], the
approximate speed change as follows. (The
sound will remain muted.)
FWD FWD FWD
x 1 / 4 x 1 / 8 x 1 / 1 6
REV REV REV
To return to normal playback, press [PLAY P].
Hint
• Forward / reverse speeds are indicated with icons as
follows.
Forward (Approx. Speed):
x1 / 16:
x1 / 8:
x1 / 2:
Reverse (Approx. Speed):
x1 / 16:
x1 / 8:
x1 / 4:
Note
• Only slow forward is available when playing back
Video CDs.
Zoom
Video
DVD-V DVD-V DVD-RW DVD-RW
D D VD+R DVD+RW VD+RW W DVD+R D D VD+R VD+R
1
During playback, press [ZOOM].
1 1 1 1 1 1
Four options are available, x1.0, x1.2, x1.5 and
x2.0. These are displayed excluding the current
zoom rate.
Hint
• You can also select the zoom function by pressing
[DISPLAY]. In this case, press [DISPLAY] first,
icon using [Cursor L / P], and then
select the
press [ENTER].
EN
VR
DVD-RW DVD-RW DVD-R DVD-R
VCD VCD VCD
FWD FWD FWD
x 1 / 1 6 x 1 / 8 x 1 / 2
Pause
REV REV REV
VR
DVD-RW DVD-RW DVD-R DVD-R
VCD VCD VCD JPEG JPEG JPEG
0:00:00 0:00:00 0:00:00 DVD-Video DVD-Video DVD-Video
1.2 1.2
1.2 1.2
1.5 1.5
2.0 2.0
42
2
Select the desired zoom factor to
zoom using [Cursor U / D], then
press [ENTER].
The zoom area is displayed.
3
Select the desired zoom position
using [Cursor U / D / L / P], then
press [ENTER].
Zoom playback will start.
Hint
• To exit the zoom menu, press [ZOOM] at step 1.
• To cancel the zoom function, select x1.0 using
[Cursor U / D], then press [ENTER].
Note
• If selecting a smaller factor than that currently
selected, the zoom area is not displayed.
• You cannot slide the zoomed picture on some JPEG
files.

Marker Setup

Video
DVD-V DVD-V DVD-RW DVD-RW DVD-RW DVD-RW
DVD+RW D D VD+R VD+RW W DVD+R D D VD+R VD+R CD CD CD
You can assign a specific point on a disc to return
later.
1
During playback, press [DISPLAY].
2
Select the icon using
[Cursor L / P], then press [ENTER].
Marker setup menu for DVD-Video mode
1 1 1 1 1 1 0:00:00 0:00:00 0:00:00
Marker setup menu for Audio CD mode
1 0:00:00
3
Select the desired marker number
using [Cursor U / D]. When the disc
reaches the desired point, press
[ENTER].
The title (track) number and the time are
displayed.
4
To return to the marker later, select
the desired marker number using
[Cursor U / D], then press [ENTER].
VR
DVD-R DVD-R
VCD VCD VCD
(PBC OFF)
DVD-Video DVD-Video DVD-Video
Audio CD