Setting Or Clearing Chapter Markers - FUNAI DRV-B2734 Owner's Manual

DRV_B2737_B2734.book Page 50 Thursday, March 31, 2005 10:04 PM
• Unrecognisable characters will be replaced with
asterisks (*). If you delete them, adjoining
characters may change to asterisks (*) or other.

Setting or clearing chapter markers

Video
DVD-RW DVD-RW
You can add chapter markers to a title. After a title is
marked with chapters, you can use the chapter search
feature.
You can specify the interval of chapter markers for
titles last more than 5 minutes.
Press [DVD ] first.
1
In stop mode, press [SETUP].
"Easy Setting Menu" or "Advanced Setting Menu"
will appear.
2
Select "Disc" using [Cursor U / D],
then press [ENTER].
3
Select "Title List" using
[Cursor U / D], then press [ENTER].
4
Select the desired title using
[Cursor U / D / L / P], then press
[ENTER].
5
Select "Chapter Mark" using
[Cursor U / D], then press [ENTER].
6
Select the desired interval using
[Cursor U / D], then press [ENTER].
Title List Title List Chapter Mark Chapter Mark
15/04 19:00 P12 2H P8 EP
7
Select "Yes" using [Cursor U / D],
then press [ENTER].
Title List Title List Chapter Mark Chapter Mark
P8 EP 15/04 19:00 P12 2H
Chapter markers are added.
If you select "OFF" at step 6, all the chapter
markers are erased.
EN
8
Note
• You cannot select a chapter marker interval that
exceeds the length of a title.
• The length of chapters may slightly deviate from the
one specified at the step 6.
• A chapter marker may be delayed depending on the
recording content.
OFF
OFF
6
5 minutes 5 minutes
10 minutes 10 minutes
15 minutes 15 minutes
30 minutes 30 minutes
60 minutes 60 minutes
0:00:59 1:00:59
5 minutes OFF
Yes Yes Yes Yes
6
No No
1:00:59 0:00:59
50
Press [SETUP].
Writing on the disc starts.
It may take a while to write the data on a disc.