4 Replacement Procedures
4.18 Bluetooth module
Removing the Bluetooth module
To remove the Bluetooth module, follow the steps below and refer to Figure 4-25.
1. Disconnect the Bluetooth antenna cable and Bluetooth FFC from the connector on
the Bluetooth module.
2. Remove the following screw and Bluetooth module.
• M2×3B
Bluetooth antenna cable
4-44
[CONFIDENTIAL]
S-THIN HEAD
M2x3B S-THIN HEAD
Bluetooth module
Figure 4-25 Removing the Bluetooth module
4.18 Bluetooth module
×1
Bluetooth FFC
PORTÉGÉ R600 Maintenance Manual (960-709)