Toshiba R600 S4202 - Portege - Core 2 Duo 1.4 GHz Maintenance Manual page 268

4 Replacement Procedures
3. Disconnect the microphone from the connector CN6050 on the sound board and
remove the microphone from the sound board.
Figure 4-22 Removing the sound board/Microphone (2)
Installing the Sound board/Microphone
To install the sound board/microphone, follow the steps below and refer to Figure 4-21 and
4-22.
1. Set the microphone to the slot of the sound board and connect the microphone to the
connector CN6050 on the sound board.
2. Connect the sound board FPC and speaker harness to the connector CN9510 and
CN6350 on the sound board.
3. Set the sound board to the slot and secure it with following screw.
• M2×4C
4-40 [CONFIDENTIAL]
Microphone
S-THIN HEAD
4.16 Sound board/Microphone
CN6050
×1
PORTÉGÉ R600 Maintenance Manual (960-709)