Wearing The Headset - Creative Sound Blaster EVO Wireless Manual

Wearing the Headset

Adjust the headband so that the headset rests lightly on your head. Do not tighten excessively.
Adjusting the Volume
Reset Headset to Factory Default Settings
Turn off your headset. Press and hold the Multifunction button followed by Power ON/OFFbutton
for 1 second to reset Bluetooth pairings and volume level to their initial settings. A 3-note tone will be
heard to indicate that the settings are all reset. The headset then returns to power on mode and ready
for new Bluetooth pairings.
The Volume Control on the headset cup can be used to adjust your
headset volume to a comfortable level. You can also adjust the
volume via the software or the built-in volume settings on your
computer.
CAUTION:
Do not listen to audio on your headset at high volumes for prolonged
periods of time to avoid impairing your hearing.
Using Your Sound Blaster EVO Wireless 13