Manual Pairing - Creative Sound Blaster EVO Wireless Manual

Manual Pairing

Step i : Activate pairing mode on the headset
Turn on your headset. If the headset has not been paired with any devices previously, it will go into
Bluetooth discoverable mode. Otherwise, it will be automatically paired to previously paired devices.
The Bluetooth discoverable mode is only available for 60 seconds after the headset is turned on. To
activate Bluetooth again, press the Multifunction button for 5 seconds. The LED will begin to flash
slowly in blue for 60 seconds while waiting to be connected.
Step ii : Activate pairing mode on your device
Activate Bluetooth on your smart device. From the list of discovered Bluetooth devices, select "SB EVO
Wireless".
Devices
Ziisound D5
ZK-S9
Sound Blaster Evo Wireless
Devices
Ziisound D5
ZK-S9
Sound Blaster Evo Wireless
Using Your Sound Blaster EVO Wireless 8