Clear Or Reset Headset; List Of Button/Indicator/Connector/Port Functions - Creative WP-350 Quick Start Manual

button for 2 seconds and release.
• Note that features such as voice dial, last number
redial or three-way call are phone dependent.

Clear or reset headset

• Press and hold the Volume Down "-" and Multifunction
buttons for more than 6 seconds to clear the paired
Bluetooth devices
• If the headset malfunctions, reset it by supplying USB
power, then press the Volume Up "+" and Multifunction
buttons for about 1 second
Automatic shutdown
• Once the headset is powered on, if it is unable to
connect to the last paired device or failed to pair with a
new device within 5 minutes, the headset will
automatically shut down.
List of button, indicator and connector / port functions
Button
1.
Multifunction
(Power /
Pair / Call)
Power: Press and hold for 2 seconds to
power on the headset. Press and hold
for 3 seconds to power off the headset.
Pair: In off mode, press and hold for
more than 5 seconds to activate Pairing
mode.
Call: Press and hold for 1 second to
activate voice dial. Press and hold for 2
seconds to redial the last called number
when no call is in progress. Press and
release to answer or end an incoming
call. Press and hold for 2 seconds to
reject a call during an incoming call.
Press twice to accept a call waiting
and put on hold the ongoing call. Press
together with '+' button and release to
initiate a three-way call.
Function