Using The Headset - Creative Sound Blaster Recon3D Omega Wireless User Manual

Using the Headset

Turn on/off the headset
Press and hold the headset's Power button for three seconds to turn it
on/off. The Power LED lights up blue when the headset is turned on.
Put on the headset
Adjust the headband so that the headset rests lightly on your head. Do not
tighten excessively.
CAUTION
Adjust headset volume to a comfortable level. Do not listen to audio on
your headset at high volumes for prolonged periods of time as hearing
loss might result.
Setting the volume level
In general, you should set the playback volume on the console to the
maximum, and use the volume controls on the audio device or headset to
adjust the loudness to your desired level. However, if the sound distorts,
lower the playback volume to avoid overloading the audio circuits.