Table of Contents
Advertisement
Yoda CB2460.book Page 2 Tuesday, April 19, 2005 5:37 PM
1
1
Charge your headset
Fully charge your headset before using it for the first time. To charge your headset's
battery, connect the power adapter to your headset. This takes approximately five hours.
Consequently, charging your headset takes three hours.
2
2
Pair your headset and mobile phone
Before using your headset for the first time, pair it with a Bluetooth-enabled mobile phone.
1.
If your headset is turned on, turn it off by pressing and holding the Multi-function
button until the LED blinks rapidly.
2.
Place your headset within one meter (three feet) of your mobile phone.
3.
Press and hold the Multi-function button until the LED blinks rapidly.
4.
Turn on your mobile phone's Bluetooth feature. For more information, see your
mobile phone's User's Guide.
5.
Set your mobile phone to detect Bluetooth devices.
6.
From the list that appears, select CB2460Creative.
7.
When prompted for a passkey, enter 0000 to complete pairing.
Some mobile phones require an additional connection step after pairing.
• If the pairing is not completed within two minutes, your headset turns itself off
automatically.
• If your headset is successfully paired to your mobile phone, the LED blinks blue five
times, and then once every five seconds.
2
Getting Started
Advertisement
Table of Contents
