Updating The Switch Blade Firmware - Fujitsu PRIMERGY BX600 S3 Operating Manual

Updating BX600 System Components
5.4.3

Updating the Switch Blade Firmware

I
Before you update the firmware, you must allocate IP addresses to the
individual switch blades.
Proceed as follows:
Ê Switch on the basic unit and start the management console (Telnet) of the
management blade.
⎜
⎜ -------------------------------------------------------------------------------- ⎟
⎜ (1) Management Agent
⎜ (2) Emergency Management Port
⎜ (3) Console Redirection
⎜ (4) TFTP upgrade
⎜ (5) Logout
⎜ (6) Reboot Management Blade
⎜ (7) System Information Dump
⎜ Enter Selection: 3
Ê In the management blade console, select the menu item Console Redirection.
⎜
Console Redirection Table
⎜ -------------------------------------------------------------------------------- ⎟
⎜ (1) Console Redirect Server Blade
⎜ (2) Console Redirect Switch Blade
⎜ (3) Set Return Hotkey , Ctrl+(a character) : 0
⎜ Enter selection or type (0) to quit: 2
Ê In the Console Redirection Table menu, select the menu item Console Redirect
Switch Blade.
64
Preparation for Use and Operation
Console Menu
Operating Manual
page_root
page_0.
⎟
⎟
⎟
⎟
⎟
⎟
⎟
⎟
⎟
⎟
⎟
⎟
⎟
⎟
BX600 S3