Installing The Hardware; Installation Steps - Fujitsu PRIMERGY BX600 S3 Operating Manual

Installing the Hardware

4 Installing the Hardware
V
CAUTION!
Please note the safety instructions in the
page 21.
Do not expose the PRIMERGY BX600 S3 basic unit to extreme environ-
mental conditions (see
from dust, moisture, and heat.
4.1

Installation Steps

The installation steps are described in detail in the following sections of this
chapter:
Unpacking the basic unit (see
Mounting the basic unit in the rack (see
arrangement on the order lists).
Cabling the basic unit (see
Routing" on page 43
connecting Cables" on page
Connecting the basic unit to the mains voltage (see
BX600 S3
section "Technical Data" on page
4.2 on page
4.4 on page
and the section "Instructions on Connecting and Dis-
45.
Operating Manual
chapter "Important Notes" on
34).
4.3 on page 35 and also the layout
41). See also the
4.5 on page
Installation Steps
16). Protect it
section "Cable
46).
33