Features - Fujitsu PRIMERGY BX600 S3 Operating Manual

Features

1.2 Features
The PRIMERGY BX600 S3 basic unit provides a high-level infrastructure for the
installed server blades.
Server Capacity
The PRIMERGY BX600 S3 basic unit provides slots for up to ten hot-pluggable
server blades. For details of the performance features of the different server
blade models, see the relevant operating manuals listed under
cations" on page
Communication Interfaces
The PRIMERGY BX600 S3 basic unit has four slots on the back for installing
different types of I/O blades which allow the installed server blades to be
connected to the Ethernet LAN or to SAN environments. The connections can
be implemented via switch blades and/or pass-thru blades.
Ethernet LAN I/O blades
To connect the server blades to the LAN the following I/O blade models are
available:
Gbit Ethernet LAN switch blade (SB9) 6x1Gbit
– 10 internal 1Gbit downlink ports to the server blades
– 6 external 1Gbit uplink ports (RJ45)
Gbit Ethernet LAN switch blade (SB9) 10Gbit multi-mode
– 10 internal 1Gbit downlink ports to the server blades
– 6 external 1Gbit uplink ports (RJ45)
– 2 external 10Gbit uplink ports (1xSFP, 1xCX4)
Cisco Catalyst Blade Switch 3040
– 10 internal 10 1Gbit downlink ports to the server blades
– 2 external 10/100/1000BASE-T copper Gigabit Ethernet uplink
ports
– 4 external uplink ports via Cisco SFP modules for 1000BASE-SX
Fibre Optic and 10/100/1000BASE-T copper)
10
157.
Operating Manual
Preface
"Related Publi-
BX600 S3