Operating and Indicator Elements
5.1.2
The Rear
Figure 15: System operating and indicator elements on the rear
1
Rear identify button
Pressing this button lights up the rear identify indicator. The front and
rear identify indicators will be synchronized.
2
Rear identify/Fault indicator (green LED)
Lights green:
Blinks green:
1
Figure
15
shows the operator panel of the standard KVM blade. For further information on this
KVM blade and on the adv. KVM blade, see
52
1
This system has been selected for identification
(identify LED is lit) by pressing the front or rear identify
button.
To deselect the system, press either of the identify
buttons again.
SUM error: A malfunction has occurred in the system.
chapter "KVM Blade" on page
Operating Manual
Preparation for Use and Operation
1
119.
BX600 S3