Fujitsu PRIMERGY BX600 S3 Operating Manual page 28

Notes on Installing in the Rack
V
CAUTION!
For safety reasons only one unit may be withdrawn from the rack at a
time when performing assembly or service work.
Ensure that the anti-tilt bracket is correctly mounted when you set up
the rack.
If more than one unit is withdrawn from the rack at any one time, the
rack is in danger of tilting forward.
When connecting and disconnecting cables, read the relevant notes
in the "Important notes" chapter in the technical manual for the
relevant rack. The technical manual is supplied with the corre-
sponding rack.
The power connection for the rack must be installed by an authorized
technician (electrician).
If the server is integrated in a (rack) installation that receives power
from an industrial (public) power supply network with the IEC309
connector, the (public) power supply protection must comply with the
requirements for the non-industrial (public) power supply networks for
the type-A connector.
The power supply for the rack should be divided amongst the three
phases of a three-phase power connection.
28 Operating Manual
Important Notes
BX600 S3