Usb Storage Devices - NETGEAR RND4000v2 Software Manual

USB Storage Devices

You can connect USB disk and flash drives to your ReadyNAS system. USB disk and flash
drives that you connect to your ReadyNAS system must use the FAT32 or NTFS file system.

To connect a USB storage device:
1. Connect a USB storage device to one of the USB ports on your ReadyNAS storage
system.
For more information about the USB ports on your storage system, see the ReadyNAS
Duo v2 and NV+ v2 Hardware Manual.
2. (Optional) Select Configure > System.
The Hardware section of the screen shows information about the USB storage device
The connected USB device is shown in the Volumes section of the screen.
3. (Optional) To safely unmount the USB storage device, click the Disconnect icon.
ReadyNAS for Home RAIDiator 5.3
System Management
71
.
Disconnect
icon
USB storage
device
information
USB device
Volume