Host Name And Workgroup - NETGEAR RND4000v2 Software Manual


To configure DNS settings manually:
1. Select Configure, scroll down to the Network section and click the DNS Settings
configure icon.
The DNS Settings dialog box displays.
2. In at least one Domain Name Server field, enter a DNS server IP address.
3. (Optional) In the Domain name field, enter a domain name.
4. Click the Apply button.
Your settings are saved.

Host Name and Workgroup

Your ReadyNAS storage system uses the host name to advertise itself on your network.
When you review your network using RAIDar, your computer or any other interface, you can
recognize your storage system by its host name.
The default host name is nas- followed by the last 3 bytes of the system's primary MAC
address. You can change the hostname to one that is easier to remember and recognize.
A workgroup is a set of computers on a LAN. Assigning devices to a workgroup can make it
easier to manage multiple network-attached devices. If you do not specify a workgroup, the
default workgroup NETGEAR is used.
ReadyNAS for Home RAIDiator 5.3
System Management
69