Working With Usb Volumes - NETGEAR RNRX4410 - ReadyNAS 2100 NAS Server User Manual

ReadyNAS 2100 User Manual
To configure an iSCSI target volume on the ReadyNAS, go to Volumes > Volume Settings >
iSCSI.
Figure 2-25
Enable iSCSI support, click the Create iSCSI Target button, and enter the desired name of the
target and the capacity you wish to reserve for this target device. Maximum capacity is slightly less
than the full free space on the ReadyNAS or 2 TB, whichever is less. If you wish to enable
authentication for access, enable CHAP authentication and specify the user name and password.
The password needs to be at least 12 characters long.
Go to this link on ReadyNAS.com for instructions on setting up iSCSI access via initiators in
various operating systems.

Working with USB Volumes

USB storage devices are shared using the name of the device appended with the partition number.
You can change the base device name in Volumes > USB Storage, if you want.
The USB tab displays the USB disk and flash devices connected to the ReadyNAS 2100, and
offers various options for these devices. A flash device appears as USB_FLASH_1 and a disk
device appears as USB_HDD_1. If you have multiple devices, they appear appended by an
2-22 Setting Up and Managing Your ReadyNAS 2100
v1.0, May 2009