NETGEAR RND4000v2 Software Manual page 9

Table 1. RAIDar LED icon descriptions (Continued)
LED icon Description
The volume is in life-support mode.
Life-support mode happens when the volume encounters multiple disk
failures and might be dead. The ReadyNAS system blocks it from being
marked dead in case someone removed the wrong disk while the
system was running. If the wrong disk was pulled out, shut down the
system immediately, reconnect the disk, and restart the system.
Note:
the disk is marked as a newly added disk and all data on that
disk will be lost during the initialization process.
A lengthy background task such as a system update is in progress.
You can use the following buttons to learn more about the ReadyNAS system or systems on
your network:
• Setup. Launches Dashboard for the highlighted system.
• Browse. Displays the shares available on the highlighted system. This feature works on
the Windows platform only.
• Rescan. Updates the list of ReadyNAS systems on the network and updates the status of
each system it discovers.
• Locate. Causes the LEDs on the highlighted system to blink. Locate is useful if you have
multiple ReadyNAS storage systems and you want to determine which RAIDar entry
corresponds to which physical system.
• About. Displays RAIDar information.
• Help. Displays the help screen.
• Exit. Closes RAIDar.

To discover your ReadyNAS system and launch Dashboard:
1. Install the appropriate version of RAIDar on a computer that is connected to the same
local area network (LAN) as your ReadyNAS storage system.
2. If you are using Windows XP before SP2, disable the Internet connection firewall.
3. Launch the RAIDar utility.
ReadyNAS for Home RAIDiator 5.3
If you reconnect the disk while the system is running,
Getting Started
9