Edit Groups - NETGEAR RND4000v2 Software Manual

Edit Groups

Use Dashboard to edit a group.

To edit a group:
1. Click Configure > Security > Groups and highlight the group that you want to edit.
The right pane populates with information about this group. The Secondary Members
section includes a list of all users on your ReadyNAS system. Use these guidelines to
determine a user's group membership status:
• If the check box next to a user is selected and is active (that is, it can be cleared), that
user is a secondary member of the group.
• If the check box next to a user is selected and is dimmed (that is, it cannot be
cleared), that user is a primary member of the group.
• If the check box next to a user is clear, that user is not a primary or secondary
member of the group.
2. (Optional) To change the group name, enter a new name in the Name field.
3. (Optional) To add a user to this group as secondary member, select the check box next to
the user's name.
To change a user's primary group membership, follow the steps in
page 52.
4. (Optional) To remove a user as a secondary member of this group, clear the check box next
to the user's name.
You cannot remove primary members from a group using this screen. To move a primary
member of this group to another group, follow the steps in
page 52.
5. Click the Apply button.
Your changes are saved.
ReadyNAS for Home RAIDiator 5.3
Users and Groups
55
Edit User Accounts
Edit User Accounts on
on