Moving A Track - Yamaha DGT7A Advanced Operation Manual

6
Press [ENTER].
A display similar to the following appears.
7
Press [+/YES] to mix the tracks.
The first track is merged into the second
track and then deleted.
Note: The voice and volume data from the
first track will be lost. The voice and
volume data from the second track will
be used.
Note: If a piano track is mixed with an
Ensemble track or vice versa, the piano
track's continuous pedal data (half
pedal) will be lost, but the on/off pedal
data will be kept.
If you do not want to mix the two tracks,
press [–/NO] to cancel the function.
44

Moving a Track

You can move data from one track to a different
track.
1
Specify a disk.
2
Press [FUNC.].
The FUNC. indicator lights and the
Function menu appears.
3
Press [>] until the c cursor is next
to Track, then press [ENTER].
The following display appears.
4
With the c cursor at the far left,
press the [–/NO] and [+/YES]
buttons until "Move" appears.
5
Press [>] to move the c cursor to
its next position, then use the
[–/NO] and [+/YES] buttons to
select the track you want to
move.
The symbol of the selected track is blacked
in.