Synchronization Using The Mtc - Yamaha DGT7A Advanced Operation Manual

Prg The import file is played by the
piano on the channel with the
smallest number containing a
piano group voice.
Prg(all) All channels that contain a
piano group voice in the
import file is played by the
piano.
6
Press [PLAY] to play back the song
disk.
62
Synchronization Using
the MTC
MTC Synchronization
Settings
In order to achieve synchronization using the
MTC (MIDI time code), the settings for sending
and receiving the MTC are performed.
This Disklavier has a function that uses the MIDI
time code (MTC) to synchronize with an external
component.
This Disklavier can function either as the Master
or as the Slave when synchronization is to be
achieved using the MTC. Set the MTC-related
parameters in order to use the synchronization
function.
1
Press [FUNC.].
The FUNC. indicator lights and the
Function menu appears.
2
Press [>] until the c cursor is next
to the MIDI setup option, then
press [ENTER].
The following display appears.
3
Press [>] until the c cursor is next
to the MTC, then press [ENTER].
The following display appears.